Sander Polisher Parts

$19.09

Manufacturer Part Number:: CB303

This set of two carbon brushes is a genuine Makita replacement part, packaged in an official Makita retail box. Each brush includes wire leads and attached brush springs, and is designed to restore optimal performance in compatible Makita tools. Carbon brushes are among the most commonly replaced components in power tools, as they gradually wear down through friction and regular use. Worn brushes ...

Carbon Brush Assembly

★★★★★

(9)

$6.16

Manufacturer Part Number:: 22-18-0680

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is bec...

PAD

★★★★★

(137)

$39.63

Manufacturer Part Number:: 151281-08

The 151281-08 Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper) Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad. When a pad needs to be replaced, simpl...

5 DISC ASSEMBLY W/ H&L

★★★★★

(197)

$9.39

Manufacturer Part Number:: 300527002

It is a genuine OEM sourced 5-inch sanding pad assembly that is specially designed for use with Craftsman orbital sanders. Its purpose is to provide support for hook and loop sandpaper, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. To make the pad last longer do not put to much pressure on the sander when using it, the pressure will create heat and rui...

Power Cord

★★★★★

(75)

$27.42

Manufacturer Part Number:: 330072-98

Length: 8' Gauge: 18 Wires: 2 Type: Bare Wire This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also rou...

Sander Pad & Backing Plate

★★★★★

(34)

$9.50

Manufacturer Part Number:: 151284-00SV

This sander pad is a genuine Dewalt replacement part, not generic or aftermarket. It it a Foam Rubber type pad and is compatible with clamp-on style sandpaper. It is not compatible with hook-and loop sandpaper. This sander pad has a metal backing plate with a padded sanding surface attached. The pad is complete and ready to install. This sander pad will fit the Dewalt sanders listed in the 'Compa...

BRUSH

★★★★★

(21)

$21.55

Manufacturer Part Number:: N031652

This brush is a genuine Porter-Cable replacement part, not generic. As pictured, this brush is ready to install and includes carbon brush, wire lead, and spring. This item is sold individually. Over time, brushes will wear down and eventually require replacement. This brush will fit the models listed in the 'Compatibility' section below. It is not guaranteed to fit any other power tool models. ...

Sander Carbon Brush Set

★★★★★

(6)

$11.45

Manufacturer Part Number:: N398321

This motor brush set is for power tools. The motor brush set transfers electric current to the spinning armature in the motor. The set includes both motor brushes. Unplug the power tool before installing this part.

BRUSH

★★★★★

(33)

$12.29

Manufacturer Part Number:: 445861-25

(Sold Individually) This motor brush is for grinders. The motor brush transfers electric current to the spinning armature in the motor. Unplug the grinder before installing this part. Wear work gloves to protect your hands.

Dust Nozzle

★★★★★

(6)

$7.27

Manufacturer Part Number:: 416497-7

Genuine Makita replacement part, this part is sold individually. This is the dust nozzle for the Makita Belt Sanders listed below. The Dust Bag part number 122562-9 attaches to it. It does not include the part number 213415-4 O-Ring which secures the Nozzle into the housing.

Carbon Brush Set

★★★★★

(5)

$24.84

Manufacturer Part Number:: CB340

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that’s operating intermittently. • New brushes can ...

Hook And Loop Sander Pad

★★★★★

(48)

$10.44

Manufacturer Part Number:: 51-36-7100

Genuine Milwaukee replacement part. Includes one Pad. This Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper) Applying too much pressure on the sander may cause premature wear on the Hook and Loop...

Popular Sander Polisher Brands

Popular Sander Polisher Parts

Popular Sander Polisher Models

All Sander Polisher Brands

Shop by Popular Sander Polisher Part Types

Sander Polisher Parts

Search By Model or Part Number

Popular Sander Polisher Brands

Popular Sander Polisher Parts

Popular Sander Polisher Models

All Sander Polisher Brands

Shop by Popular Sander Polisher Part Types