This is a genuine part that is supplied by the original manufacturer for use with Craftsman wood lathes and lawn mowers. The fuel filter removes debris before it reaches the carburetor in your equipment. This part made of plastic and is sold individually. For installation, you will need a socket wrench to remove any shrouds or panels, and a pair of needle nose pliers to aid you.
Removed motor from mower. Drained oil. Disassembled and removed oil sump pan. Replaced crank seal cleaned surfaces. Installed new gasket on oil sump pan. Reassembled and torqued new bolts to correct spec. Reassembled mower. Added oil and new filters. Started engine. Reassembled mower deck and belts after confirming no leaks. Total time
... Read moreon this project from start to finish approximately 5 hours performed with all the correct tools and mechanical knowledge.
Read less
Did you find this story helpful?
Thank you for voting!
New season oil change, new plug and air filter (breakfast for the gophers)
Drained oil, removed fuel line from motor, disconnected throttle cable and starter cable, removed motor from tractor.Put motor on the bench replaced lower oil seal and sparkplugs replaced oil filter. Reinstalled motor on tractor replaced fuel filter reinstalled fuel line, throttle and starter cables, replaced air filter, filled with oil s
... Read moretart and check for leaks.
This task was a tune-up for my lawn tractor. I replaced the Oil and Filter, Gas Filter, Air Filter and Spark Plug. What I liked most about eReplacementParts.com was that I was able to put in my Craftsman Model Number and the complete parts list for the tractor was itemized. Thank you so much, you made this a very easy task. I also plan to
... Read more perform this maintenance service every year or as needed.
Watched YouTube videos for instructions. Removed valve cover replaced push rod. Also had to push valve guide back in place. Replaced valve cover. Also replaced air filter.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9158614
Manufacturer Part Number: 845125
Engine
- Briggs & Stratton Small Engine Model 296447/0003-H1 (296447/0003H1, 296447/0003 H1) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
