The mulching upper blade attaches to the blade holder. This is an OEM part sourced directly from the manufacturer and used in Honda lawn mowers. The blade is available as an individual replacement part. It is made out of metal and will need replacing if it breaks. A socket set may be required when replacing this part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Happy Customer
All the parts I ordered were correct and fit perfectly. Also, and perhaps more important, your website is very easy to navigate especially when trying to find parts for a machine that is nine years old. The Honda site was worthless as were others. Then I remembered your site! Keep up the good work.
Ralph - June 4, 2019
Verified Purchase
★★★★★
★★★★★
Mower blades
Arrived early, was easy to install. Great job, I would order from them again.
Dino - June 7, 2019
Verified Purchase
★★★★★
★★★★★
Easy fix
New genuine Honda part. Fits and works great.
Guest - August 9, 2019
Verified Purchase
★★★★★
★★★★★
Worked out fine
It all went well
Guest - November 22, 2019
Verified Purchase
★★★★★
★★★★★
Mower blade replacement
Received part quickly ,was exactly what I had ordered , great friendly and knowledgeable service.
Guest - April 14, 2020
Verified Purchase
★★★★★
★★★★★
Honda lawnmower mulching blade(s) replacement..
Have a 13 year old Honda lawnmower and finally got around to replacing the "mulching" blades. There are two blades that have to be replaced - one is mounted directly on top of the other. Both blades are held in place by the same two bolts. Replacement was a piece of cake!! The blades (had Honda brand on them) fit perfectly. The selection of these blades was made easy by the "ereplacemenrt" selection list - just find the serial number and model of Honda lawnmower you have and match that to the correct blades. Blade replacement process took about 15 minutes!! Cleaning out the bottom of the lawnmower took another 15 minutes however!! ..hadn't done that in quite awhile either! One note - I put thread lock on the bolt threads when reinstalling them.. ..just being cautious!
GERALD - July 23, 2021
Verified Purchase
★★★★★
★★★★★
Replaced the blades after mowed 25 X
The new blades arrived right on time &cits the grass even better than before replace the used ones ?worn out after sharpened 2X) .
Thom - July 18, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Blade Replacement
1 Turned mower on side
2 Removed two bolts and spring washers
3 Pulled blades off the spindle
4 Replaced new blades
5 Replaced two bolts and spring washer
Rear wheel replacement
1 Removed axle bolt and washers
2 Removed drive gear from the old wheel
3 Placed ol
... Read mored drive gear onto new wheel
4 Placed new wheel on mower
Read less
Did you find this story helpful?
Thank you for voting!
Blades are getting dull & sharpened twice .ItGÇÖs time to get a new pair of blades for the next spring.
Replaced the blades from old & dull (sharpened 2X) with a new pair for next spring. Easy change the blades with socket wrench & a 2x4x@ 18in piece lumber for hold the moving blades while loosen the bolts & tighten respectively.
1 Removed gas from lawn mower
2 Undid spark plug
3 Stood lawn mower up
4 Removed the two bolts from the original blades
5 Replaced with new ones
6 Re-tighten bolts
7 Reversed procedures
Used a 5/8 socket \"rated\" at 1/2\" as you need a bit of muscle. Looked at the old, and replaced in that order(very important). Also, put a couple \"quick sprays\" of WD-40 on the bolts. Never hurts...cleaned the under deck of stuck grass.
Took off blade bolt with 14mm socket and reinstalled High lift blade. Air cleaner cover pops off. Then remove the old filter and place the new filter in. Ordered the mulching blade for when I want to mulch.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11893468
Manufacturer Part Number: 72531-VE2-020
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(VIN_MZBA-6000001_to_MZBA-6099999)_WW_18.gif "Part Location Diagram of 72531-VE2-020 Honda Blade, Mulching (upper)")
(VIN_MZBA-6000001_to_MZBA-6099999)_WW_18.gif "Part Location Diagram of 72531-VE2-020 Honda Blade, Mulching (upper)")
