Genuine Milwaukee replacement part, this item is sold individually. The Pulley Hub Washer is installed inside of the Blade Pulley Cover. It is a spacer to keep the Pulley Cover and Pulley tight in place when they are fastened together.
REMOVE BLADE ,REMOVE 3 TORX SCREW FROM THE PULLEY HUB, REMOVED THE SNAP RING , AND THE PULLEY WASHER. I THEN REMOVED THE PULLEY. INSTALLED NEW BUSHINGS IN THE PULLEY & LUBED, ASSEMBLED IN REVERSE ORDER . I ALSO REPLACED THE OLD PULLEY TIRES WITH NEW ONES.
Remove blade pulley cover, remove snap ring and pulley hub washer. Use a 1/4\" drive 9/16 socket to press / push old sleeve out, press new ones in. Put it back together in reverse order.
Removed blade
Removed 3 torx screws for wheel cover
Removed snap ring and wheel comes off and sprocket and drive chain are exposed.
Remove the sprocket and chain
Put new parts in and put back together.
Easy
Followed the very good instructions on the video......step by step, easy........I did have to jump to a different video to figure out the \"bushing\" replacement in the new case (that should have been mentioned in the case replacement video to make it easier) but it was also easy once I figured it out
I removed the blade pulley cover, then installed the hub washer and the snap ring. Then screwed the cover back on. I then simply stretched the new tire around the blade pulley. Then used the screws to mount the bumper to the saw.
I replaced the sprocket, chain, washers and bushings + replaced the rubber trucks and it works like brand new. It is a handheld Milwaukee bandsaw works great, probably for another 8 years. 60$ in parts vs 400$ for a new one. Watched a video
1. Ensure saw is unplugged and remove blade.
2. Remove wheel with worn bushings by removing torx bolts and snap ring.
3. Use a suitable sized socket to press out bushings.
4. Press in new bushings with vise or Arbor press.
5. Reinstall wheel with new plastic washers.
6. Install blade, test, and adjust trackin
... Read moreg, if necessicary.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10133559
Manufacturer Part Number: 45-88-7165
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 45-88-7165 Milwaukee Pulley Washer")
_WW_1.gif "Part Location Diagram of 45-88-7165 Milwaukee Pulley Washer")
