Genuine Milwaukee replacement part, this item is sold individually. This Snap Ring is used in a number of Milwaukee Tools as shown below. Snap Rings are used in various parts of tools. They are usually installed on a shaft to keep a bearing or a gear from moving. They are also used in other applications depending on what tool you are working on. This is an example of an external Snap Ring.
Remove blade pulley cover, remove snap ring and pulley hub washer. Use a 1/4\" drive 9/16 socket to press / push old sleeve out, press new ones in. Put it back together in reverse order.
Removed the blade pulley cover
Removed the blade pulley and sleeve bearings
Installed the new chain and sprocket assembly
Installed the new bushings, the blade pulley, washer and the new snap ring
Installed the blade pulley cover
Did you find this story helpful?
Thank you for voting!
Stripped sprocket inside drive side of Milwaukee Bandsaw
Removed blade
Removed 3 torx screws for wheel cover
Removed snap ring and wheel comes off and sprocket and drive chain are exposed.
Remove the sprocket and chain
Put new parts in and put back together.
Easy
1. Disassembled drive wheel assembly.
2. Cleaned parts from grease and metal.
3. Lubricated the new sprocket and chain.
4. Positioned chain sprocket and chain on to driveshaft, installed new washer and snap ring.
5. Secured the drive wheel, and cap, and torqued screws, installed saw blade and tested.
6. Great
... Read more OEM parts, bandsaw is back in service.
Followed the very good instructions on the video......step by step, easy........I did have to jump to a different video to figure out the \"bushing\" replacement in the new case (that should have been mentioned in the case replacement video to make it easier) but it was also easy once I figured it out
I removed the blade pulley cover, then installed the hub washer and the snap ring. Then screwed the cover back on. I then simply stretched the new tire around the blade pulley. Then used the screws to mount the bumper to the saw.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10127145
Manufacturer Part Number: 34-60-1400
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 34-60-1400 Milwaukee Snap Ring")
_WW_1.gif "Part Location Diagram of 34-60-1400 Milwaukee Snap Ring")
