Black and Decker Pressure Washer Parts
We sell only genuine OEM Black and Decker ® parts.
Top Black and Decker Pressure Washer Models
See All ModelsPopular Black and Decker Pressure Washer Parts
- Manufacturer Part Number:
- 5140095-85
This thermal relief valve is a genuine part produced by the original manufacturer for DeWALT pressure washers. The valve connects to the pump and protects it from overheating. If the pump gets too hot this valve will pop out to release extra pressure, and prevent excessive damage to the pump. It is an identical replacement for a damaged or a missing component that was installed on a new unit. Note...
- Manufacturer Part Number:
- 5140117-50
- Manufacturer Part Number:
- 5140095-03
This genuine OEM part is made to fit the DeWALT machines listed below. This rubber foot attaches to the underside of the frame, dampening vibrations and keeping the machine stable while protecting surfaces beneath. One (1) foot and one (1) Torx screw are included.
- Manufacturer Part Number:
- 285800-98
This part is available as an individual replacement part. The spark plug attaches to the cylinder head. A socket set might be needed during the installation process. It is made out of metal and will require replacing if it wears out. This is an authentic DeWALT, Porter Cable, and DeVilbiss replacement part that is sourced from the original manufacturer for use with compressors, generators, and pressure washers.
- Manufacturer Part Number:
- 5140159-99
It is a genuine OEM sourced part which is specially designed for use with pressure washers. This is an identical replacement for a missing or faulty hose that originally came with a new unit, please note this component can be used on pumps that produce up to 2600 PSI. Keep in mind this high-quality high-pressure hose is sold individually. Please make sure to refer to the owners manual of your mode...
- Manufacturer Part Number:
- F464
It is a genuine item which is supplied by the original equipment manufacturer for use with DeVilbiss and Porter Cable pressure washers. This is an identical replacement for a missing or damaged hardware which was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-q...
- Manufacturer Part Number:
- A16746
This part is an OEM from Porter Cable. The hose pulse 3/8 12 22 is constructed of metal and plastic parts, and has been designed for use in many pressure washers. This item is fastened onto the elbow 3/8, and is used to reduce the pulse pressure in the pump. This part is sold individually. A wrench is helpful in making the repair.
- Manufacturer Part Number:
- 5140117-46
This item is a genuine OEM sourced replacement valve kit designed for use with Dewalt pressure washers. This kit includes three (3) inner and three (3) outer valves that fit in the pump. These valve are made out of plastic with metal and they include rubber o-rings. To complete this repair you will need a set of wrenches and a screwdriver.
- Manufacturer Part Number:
- 5140117-54
This water inlet screen is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with several models of DeWALT pressure washers. This part is placed just outside the water inlet connector. A screwdriver is needed to replace this part. This is a simple installation process that should only take a few minutes.
- Manufacturer Part Number:
- N504103
- Manufacturer Part Number:
- N003522
This item has been sourced from the original manufacturer to be used with pressure washers and air compressors from Porter Cable, DeWalt, DeVilbiss, Black & Decker, and Delta. The air-filled wheel attaches to the axle or frame and is used to easily move the machine. This item is sold as an individual replacement part.
- Manufacturer Part Number:
- 5140117-47
It is an authentic part that is supplied by the original equipment manufacturer. This kit is designed for use with DeWALT pressure washers. This is the special component that the soap injector hose connects to. The kit includes one durable metal injector body, the spring and the ball. It provides an identical replacement for a faulty or a missing item that was installed on a new unit. Refer to the...