Pressure Washer Parts

$6.16

Manufacturer Part Number:: 9.134-019.0

Genuine Karcher replacement part, this item is sold individually. The purpose of this part, is to attach the Female Hose Connector to the Piston Guide. This part is made of plastic and has plastic threads that do wear out. It may be wise to have an extra one or two on hand.

Filter Seal-hose Connector-

★★★★★

(5)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 9.181-005.0

Genuine Karcher replacement part, this item is sold individually. The purpose of the 9.181-005.0 Filter Seal Hose Connector is to act as a seal to keep water from leaking out of the hose connection. It also will keep debris from entering the pump and causing it to fail.

SPRAY WAND

★★★★★

(44)

$14.98

Manufacturer Part Number:: 308494075

This replacement spray wand is specially made for use with Ryobi pressure washers. It is supplied directly from original manufacturer and it is sold individually. This items connects to the pistol/gun and allows user to connect nozzles to change spray patterns. This is a commonly replaced part due to regular wear, damage or if it is lost. Replacing a wand is easy and does not require any tools.

Detergent Suction Kit

★★★★★

(63)

$6.16

Manufacturer Part Number:: 308452002

This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.

Valve Kit (includes 6 Valves)

★★★★★

(2)

$28.96

Manufacturer Part Number:: 70-0502

It is an authentic manufacturer-supplied check valves kit which is designed for use with Mi-T-M equipment. The valves are important components that attach to the pump head to help maintain safe working water pressure at the pump. Unfortunately, over time they may wear out or get damaged eventually requiring replacements. It is a high-quality kit which includes six valves and six O-rings. Make sure...

O-ring Seal 15,6 X 1,78-nbr 70

★★★★★

(5)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 6.362-634.0

Genuine Karcher replacement part, this item is sold individually. This O-Ring/ Seal is part of the water inlet system of the Pressure Washes shown below. Over time this type of part will deteriorate and fail. At this time you will notice a water leak and need to replace this part.

O-ring Seal 80,0 X 3,0 -nbr 7

★★★★★

(4)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 6.362-471.0

It is an OEM item which is made for Karcher pressure washers. This component provides an air-tight seal for the pump housing. Over time the material will wear out and it may begin to crack eventually requiring a replacement to prevent leaks. To ensure the correct installation of the new gasket, refer to the appropriate diagrams of your specific model. Note, it is made of a durable material and is ...

Suction Valve Complete

★★★★★

(10)

$11.57

Manufacturer Part Number:: 4.580-330.0

Genuine Karcher replacement part, it is sold individually. This part along with the piston controls the flow of water through the pump assembly. This part has a tendency to wear out. It may be wise to keep a few extra on hand.

Valve (3 St Ck)

★★★★★

(6)

$30.44

Manufacturer Part Number:: 2.884-916.0

This part is a Retrofit Valve that will work on the older models as well as the newer models. Older units have shorter valves than the new pumps but you can change the length of the stem to adjust for the older units.

HIGH PRESSURE HOSE

★★★★★

(19)

$31.01

Manufacturer Part Number:: 308835065

This is a genuine Ryobi replacement high pressure hose that is supplied directly from original equipment manufacturer. It is specially designed for use with pressure washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. This hose can be used on pumps that produce up to 1700 PSI.

Oil Sealing 12x20x4/6

★★★★★

(7)

$6.84

Minimum Quantity of 2 required

Manufacturer Part Number:: 6.365-393.0

Genuine Karcher replacement part, this item is sold individually. The purpose of the Grooved Ring is to keep the oil in the pump and the water from mixing together. The piston does move through this part. This is a wear part, it will need to be replaced ASAP once it is worn.

Grooved Ring

★★★★★

(4)

$7.72

Manufacturer Part Number:: 6.365-394.0

Genuine Karcher replacement part, this item is sold individually. This part acts as a seal to keep the oil in the reservoir and the water in the pump form contaminating each other. It is installed on the piston.

Popular Pressure Washer Brands

Popular Pressure Washer Parts

Popular Pressure Washer Models

All Pressure Washer Brands

Shop by Popular Pressure Washer Part Types

Pressure Washer Parts

Search By Model or Part Number

Popular Pressure Washer Brands

Popular Pressure Washer Parts

Popular Pressure Washer Models

All Pressure Washer Brands

Shop by Popular Pressure Washer Part Types