Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9013356-1-M-Husqvarna-532174762- Skid Plate, Left Hand
Part Location Diagram of 532174762 Husqvarna Skid Plate, Left Hand
See part A-29 in the diagram
9013356-1-S-Husqvarna-532174762- Skid Plate, Left Hand 360 view
( Grid squares measure 1x1 inch )
9013356-1-S-Husqvarna-532174762- Skid Plate, Left Hand 9013356-2-S-Husqvarna-532174762- Skid Plate, Left Hand 9013356-3-S-Husqvarna-532174762- Skid Plate, Left Hand 9013356-1-S-Husqvarna-532174762- Skid Plate, Left Hand 360 view
Part Location Diagram of 532174762 Husqvarna Skid Plate, Left Hand

Skid Plate, Left Hand 532174762

Manufactured by:
Husqvarna
ERP Number:
ERP9013356
Part Number:
532174762
Original Equipment Manufacturer ?
$10.67
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(19 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This manufacturer approved replacement part is designed for snow blowers/throwers. Skid shoe/plate allows you to avoid damage and keep smooth control over cracks, gravel, and other uneven surfaces. It is made out of metal and it is sold individually. Please note the right skid plate is sold separately. It is advised to replace both skid plates at the same time. To complete this repair you will need a wrench. • First remove bolts holding old skid plate • Remove old plate and insert new skid plate • Level snow blower and adjust skid plates to desired height • Tighten skid plate bolts

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Poulan
  • Craftsman
This part works with the following products:
  • Snow Blower
  • Leaf Blower / Vacuum
Part# 532174762 replaces these:
532174762, 532184093, 532436122,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(19 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Skid shoes and scraper plate worn down from normal use on concrete.

Dale from Rutland, North Dakota

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
531064001, 532436125, 532174762
Replacement is just a simple matter of unbolting the old parts and installing the new parts. Don\'t let these parts get too worn before replacement or the wear will extend into the actual blower housing and cause damage to it.
Did you find this story helpful?
Thank you for voting!

Impeller was damaged (bent blades).

Todd from Sobieski, Wisconsin

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
531167901, 532436125, 532174762
Removed the auger bolts.
Removed the impeller bolts.
Separated the auger assembly from the power head, 2 bolts and one belt.
Removed the auger drive wheel
Removed the bearing using a puller, made the bearing slide off the impeller shaft
++this took a while
Cleaned bearing and impeller shaft for easier re-assembly
Replaced impeller drive wheel
Connected auger assembly to power head, put belt on
Reconnected auger
Changed out L and R skids
Read less
Did you find this story helpful?
Thank you for voting!

Many problems: the drive and auger wouldn\'t engage, not scraping down to the driveway, two broken knobs, extremely worn skids, rusted chute at the bottom making it hard to rotate

Todd from Redwood Falls, Minnesota

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
585056901, 532436125, 532414557, 532404932, 532435789, 532185577, 532408010, 532416954, 532178828, 532180926, 532178899, 532174762, 532178669
I replaced lots of parts using multiple tools. The only problems I had was due to rusted fasteners. I had a great experience with eReplacementParts my order arrived very fast including one part (the chute assembly) all pieces fit perfect. I did a major overhaul now the blower is running great.
Did you find this story helpful?
Thank you for voting!

My Craftsman snowblower was rusting

Jerry from Rochester, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
588077502, 582478602, 178777X479, 532174701, 532174762, 532155443
I removed the auger housing assembly from the motor/pulley assembly. Removed the auger assembly from the auger housing, disassembled the augers from the auger axle and gear assembly, the sheer bolts broke off in the disassembly, as they are designed to do. Drilled out the broken sheer bolts from the augers and auger drive shaft. I disasse mbled the snowdrift cutters and various support parts from the auger housing. I used naval jelly to treat the rusted parts, basically the outer housing of the snowblower motor assembly, the augers, the entire auger housing, the snowdrift cutters and sundry parts of the auger housing. I then used a grinder and a poly paint removal grinder wheel to clear loose paint and rust off the outer housing of the snowblower motor assembly, the augers, the entire auger housing, the snowdrift cutters and sundry parts of the auger housing. I cleaned everything with mineral spirits and soap and water. Repainted all the parts with Rustoleum yellow or black enamel, where appropriate. I cleaned the snow deflector angle cable with WD40 and greased it with automatic transmission fluid, which was light enough to lube the cable without freezing in winter. Reassembled it all with new skid plates, new sheer bolts, a new auger shaft bearing and new click pins and tested it to make sure it still ran and functioned properly.

It all took several weeks but considering the cost of a new snowblower of this quality, and the effort to hand shovel a 75 foot drive every dang day next winter, it was worth it.
Read less
Did you find this story helpful?
Thank you for voting!

Auger impeller bearing wore out after 11 years, drive pulley sheared key

Jerry from Cable, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
596039201, 532436125, 874950512, 819111507, 532188909, 532408010, 532407769, 532416954, 532174762
Disassembled, like replacing belts, removed remains of old bearing, cleaned up shaft at pulley area. Replaced defective parts and reassembled. Pretty straight forward after reading the manual. Used a tie down instead of a second person to pull auger section and power section together on re assembly. Could do it slowly and steadily while c hecking fit and clearance and it held sections together while I put the attachment bolts in the housing. All parts matched the originals with no problems and would use this website again .
Read less
Did you find this story helpful?
Thank you for voting!

Wear and tear. Same parts for 8 years before anything needed replacing

Darren from Epsom, New Hampshire

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench set
Parts Used:
532184505, 532174762, 532178666
Trial by error. Not to hard. Only challenge is by attempting to repair without the manual or user guide. Found the original skid plates were installed backwards from the manufacturer. All the replacement parts look just like the original parts :-)
Did you find this story helpful?
Thank you for voting!

Normal wear from use

EUGENE from Parker, Colorado

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
596039401, 596039201, 588077502, 586668901, 532436125, 532435830, 532198638, 532174762
Removed old parts and replaced with new
Did you find this story helpful?
Thank you for voting!

Left & right skids worn out from use.

George from Leechburg, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
596040501, 586668901, 532436125, 872110506, 532185600, 532174762
Ordered new skids & all new shoulder bolts with nuts - only hang up was removing the old corroded hardware. Used Vice Grips to hold the rounded head of the shoulder bolts from spinning to remove the lock nuts. Installation of new skids with new hardware was simple.

Happy with parts availability & relatively quick standard deivery.
Read less
Did you find this story helpful?
Thank you for voting!

Worn out

Ralph from Oceanside, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Parts Used:
532435830, 532174762
Removed the old skid plates and replaced

Removed the old scraper and replaced
Did you find this story helpful?
Thank you for voting!

Skid plates were worn

Martin from STEVENS POINT, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
532436125, 532174762
loosen and remove 4 bolts.
Place skid plates on proper side.
mount and re tighten bolts
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9013356
Manufacturer Part Number: 532174762
Brand Model Number Description
Husqvarna 1027STE Snow Blower - 1027 Ste - 10527ste (2004-03)
Husqvarna 10527 Snow Blower - Snowblower
Husqvarna 10527STE Snow Blower - Husqvarna Snowblower Model 10527STE/2003-07 (10527STE/200307, 10527STE/2003 07) Parts
Husqvarna 10530 Snow Blower - Snowblower
Husqvarna 10530SBE Snow Blower - Husqvarna Snowblower Model 10530SBE/2006-05 (10530SBE/200605, 10530SBE/2006 05) Parts
Husqvarna 10530SBEB Snow Blower - Husqvarna Snowblower Model 10530SBEB Parts
Husqvarna 110IL Edger - 110il
Husqvarna 1130 Snow Blower - 1130 Ste Xp (2004-07)
Husqvarna 1130SBEXP Snow Blower - 1130 Sbexp, 96195000200, 961950002, 2006-06
Husqvarna 1130ST Snow Blower - 1130 St - Hu1130stb (2004-03)
Husqvarna 1130STC Snow Blower - Husqvarna Snowblower Model 1130STC Parts
Husqvarna 1130STE Snow Blower - 1130 Ste - 96191000404 (2007-01)
Husqvarna 1130STEXP Snow Blower - 1130 Stexp - Hu1130stc (2004-07)
Husqvarna 345RX Brush Cutter - 345 Rx (20064000001-20081800000)
Husqvarna 524S Snow Blower - Snowblower
Husqvarna 524ST Snow Blower - 524 St - Hl524sta (2004-03)
Husqvarna 524STE Snow Blower - 524 Ste - Hl524stea (2004-08)
Husqvarna 5524SE Snow Blower - 5524 Se - 96193000200 (2006-05)
Husqvarna 5524SEB Snow Blower - Snowblower
Husqvarna 5524ST Snow Blower - 5524 St, 96191001600, 961910016, 2007-07
Husqvarna 8024ST Snow Blower - 8024 St - Hu8024sta (2002-09)
Husqvarna 8024STE Snow Blower - 8024 Ste - 96191001700 (2007-07)
Husqvarna 8524STE Snow Blower - 8524 Ste - Hl8524stea (2004-08)
Husqvarna 8527SBE Snow Blower - 8527 Sbe - 927sbe (2006-05)
Husqvarna 8527SBEB Snow Blower - Snowblower
Husqvarna 8527STE Snow Blower - 8527 Ste - Hl8527stea (2004-03)
Husqvarna 9027 Snow Blower - Snowblower
Husqvarna 9027ST Snow Blower - 9027 St, Hu9027stb, 954223074, 2004-03
Husqvarna 9027STC Snow Blower - Husqvarna Snowblower Model 9027STC Parts
Husqvarna 9027STE Snow Blower - 9027 Ste - 96191001802 (2007-10)
Skid Plate, Left Hand
$ 10.67
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖