Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
19306212-1-M-Husky-951-11349A-GASKET-FUEL DRAIN
Part Location Diagram of 951-11349A Husky GASKET-FUEL DRAIN
See part B-137 in the diagram
( Grid squares measure 1x1 inch )
19306212-1-S-Husky-951-11349A-GASKET-FUEL DRAIN Part Location Diagram of 951-11349A Husky GASKET-FUEL DRAIN

GASKET-FUEL DRAIN 951-11349A

Manufactured by:
Husky
ERP Number:
ERP19306212
Part Number:
951-11349A
Original Equipment Manufacturer ?
$6.63
On Order
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is an authentic OEM part from Yard Machines for use with Snow Blowers, Engine, Tillers, Lawn Mowers, Log Splitters, Chipper Shredders and Lawn Tractors. The carburetor float bowl gasket seals the gap between the carburetor body and the top of the carburetor float bowl. This part is sold individually. The tool needed to replace the carburetor float bowl gasket is a wrench set. Let the engine cool and drain the gas tank before installing this part. Work in a well-ventilated area and wear work gloves to protect your hands.

Frequently Purchased Together

?
Carburetor Gasket Plate
★★★★★
★★★★★
(2)
$6.16
In Stock
Minimum Quantity of 2 required
Carburetor Gasket
$8.76
In Stock
Minimum Quantity of 2 required
Fuel Bowl Gasket
$10.79
In Stock

Troubleshooting

This part works with the following brands:
  • Troy-Bilt
  • MTD
  • Yard Machines
  • Husky
  • Yard Man
This part works with the following products:
  • Snow Blower
  • Engine
  • Chainsaw
  • Tiller
  • Lawn Mower
  • Log Splitter
  • Chipper Shredder
  • Lawn Tractor
  • Cultivator
Part# 951-11349A replaces these:
751-11349, 751-11349A, 951-11349, 951-11349A,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fuel was leaking around float bowl bottom of carburetor

jim from Brunswick, Ohio

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
951-11349A, 951-11589A
Tilted snowblower onside removed float bowl
Remove old O ring
Cleaned were O ring goes
Installed new O ring with a dab of grease to hold in place
Reinstalled fuel bowl and tighten down screw to hold in place
Did you find this story helpful?
Thank you for voting!

Engine surging

Michael from Mullica Hill, New Jersey

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
951-11349A, 751P11567B
1. Remove engine control dials and buttons.
2. Remove unit drive belt cover (necessary for access of 1heat panel bolt.
3. Remove 2 screws from electric starter control (necessary for panel removal).
4. Remove all bolts for muffler heat panel and remove panel.
5. Loosen and remove 2 carburetor acorn nuts and careful ly remove panel being mindful of
ignition control wires, choke control linkage and bracket, crankcase recirculating hose
and carb primer hose.
6. With panel removed, fuel can be drained from tank using upper bolt on on carb drain
bowl or disconnecting fuel tank feed line.
7. Carefully remove carburetor being mindful of throttle and governor spring linkage and
gasket location.
8. Disassemble carb fuel bowl, float/valve assembly and immerse carb in cleaner for an
overnight soak.
9. Remove carb from cleaner, rinse and inspect. If engine was surging, the most likely
cause is a clogged jet/flow manifold located in the central column of the bowl area.
Compressed air will be necessary for this cleaning process.
10. After confirmation of a clear jet, reassemble carb and re- install in reverse order.
Read less
Did you find this story helpful?
Thank you for voting!

bowl leaking gas

Dennis from Edina, Minnesota

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
951-11349A, 951-11970
Replaced bowl gasket, with gas tank off tipped snowblower on its side so I could remove old gasket and replace with new, tipped upright and re-installed gas tank started and ran for 15 minutes, shut off and let sit to make sure no more fuel leaks.
Did you find this story helpful?
Thank you for voting!

Gas leaking out of sediment bowl

Dale from Sullivan, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
951-11349A, 951-11348A, 951-11589A
1. Removed drain screw from
sediment bowl
2. Removed sediment bowl
3. Removed sediment bowl oring
gasket
4. Replaced sediment bowl oring
gasket with the new one
5. Replaced gasket on screw that
Mounts sediment bowl
6. Mounted sediment bowl
7. Replaced g asket on sediment
bowl drain screw
8. Replaced sediment bowl drain
screw

Read less
Did you find this story helpful?
Thank you for voting!

Carburetor bowl leaking gas

Peter from Jefferson Twsp, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Parts Used:
951-11349A, 951-11348A
Removed and replaced two gaskets on bowl and drain plug. Primed and started with little issue.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19306212
Manufacturer Part Number: 951-11349A
Brand Model Number Description
Yard Machines 11A-02JV000 Lawn Mower - Push Lawn Mower
MTD 11A-02JV006 Lawn Mower - Push Lawn Mower
MTD 11A-02JX700 Lawn Mower - Push Mower 2012
MTD 11A-02JX706 Lawn Mower - Lawn Mower
Yard Machines 11A-02MY700 Lawn Mower - Push Walk-Behind Mower
Yard Machines 11A-02SB700 Lawn Mower - Push Walk-Behind Mower
MTD 11A-08M9006 Lawn Mower - Lawn Mower
MTD 11A-41M9006 Lawn Mower - Lawn Mower
MTD 11A-50M9006 Lawn Mower - Lawn Mower
Husky 11A-54M7031 Lawn Mower - Lawn Mower
Husky 11A-A0JC031 Lawn Mower - Lawn Mower
Yard Machines 11A-A0JT700 Lawn Mower - Lawn Mower
MTD 11A-A0JT706 Lawn Mower - Lawn Mower
Husky 11A-A0JT731 Lawn Mower - Lawn Mower
MTD 11A-A0JT827 Lawn Mower - Lawn Mower
Yard Machines 11A-A0S5700 Lawn Mower - Push Walk-Behind Mower
MTD 11A-A1JC027 Lawn Mower - 21" Push Mower
MTD 11A-A1JT706 Lawn Mower - Lawn Mower
MTD 11A-A1JT827 Lawn Mower - Lawn Mower
Yard Machines 11A-A1S5700 Lawn Mower - Push Walk-Behind Mower
MTD 11A-B0JT706 Lawn Mower - Lawn Mower
MTD 11A-B2J1704 Lawn Mower - 2012
Husky 11A-B2J1731 Lawn Mower - Lawn Mower
Yard Man 11A-B2M7001 Lawn Mower - Push lawn Mower
MTD 11A-B2M7004 Lawn Mower - Push Lawn Mower
Husky 11A-B2M7031 Lawn Mower - Lawn Mower
MTD 11A-B2M7059 Lawn Mower - Lawn Mower
Yard Machines 11B-A0S5700 Lawn Mower - Push Walk-Behind Mower
Yard Machines 11B-B0S5700 Lawn Mower - Push Walk-Behind Mower
Yard Man 12A-18M7002 Lawn Mower - Lawn Mower
GASKET-FUEL DRAIN
$ 6.63
On Order
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖