This genuine carburetor gasket plate is an original replacement part sourced directly from the manufacturer for use in snowblowers by MTD, Yard Machines, Troy-Bilt, Yard Man, and Cub Cadet. Positioned between the carburetor and the choke control bracket, this component is essential for creating a secure, airtight seal that ensures proper engine performance. Made from a thin, durable material, the gasket plate may require replacement if it becomes damaged or worn. This item is sold individually and may require a socket set and pliers for installation. For best results, consult your equipment’s service manual and perform the repair with the engine off and cool.
The Yard Man never seemed to work quite right since the day I bought it but over the course of the winter it had gotten worse and after Googling, I figured it was a bad carb. I was right.
The hardest part was getting at it, but I found two good YouTube videos. One on taking the carb off (that took about two hours). And one o
... Read moren putting things back together.
1 Removed belt cover
2. Remove heat shield
3. Removed choke knob
4. Removed front cover housing plunger, key and choke control
5. Disconnected and plugged fuel supply line at carburetor bowl.
6 Removed fuel primer connection at carburetor
Found carburetor 370-SUA has the wrong type of choke conne
... Read morection, cobbled together by using choke base and rod from bad carb and mounting to brass base on new carb
Read less
Did you find this story helpful?
Thank you for voting!
Getting old ND needed some TLC
Steven from Brodhead, Wisconsin
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
I cleaned the Engine, changed the Oil, replaced the Spark Plug replaced the coil assembly and replaced the Carb that was in bad shape. It went pretty smooth. You just have to lay out your parts and take your time.
Did my research on-line, and prepared all that would be needed.
Remember all Snowblowers are not equal.
Ordered new Carburetor casket.
Actually performed what was on this video link:
https://www.youtube.com/watch?v=c9bpqq0AvPA
Some things were different with my machine:
Cover to get to
... Read moreCarburetor, had to remove electric start button, Right Side.
2 Philips head screws.
Primer Button tubing for starting, very difficult to get hose back on, unless you have very small hands. Trick was to just line it up while pushing cover back on, slips right back.
Took other\'s recommended proceedure, turned the unit on its side, put a small dollop of grease in the groove to help hold the o-ring in place. Installed the metal bowl, and voila! No leak! Thanks to the others for the suggestion.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/snow-blower/seals-and-gaskets/"},{"position":2,"name":"751P11897B","title":"751P11897B","url":""}]
_WW_1.gif "Part Location Diagram of 751P11897B MTD Carburetor Gasket Plate")
_WW_1.gif "Part Location Diagram of 751P11897B MTD Carburetor Gasket Plate")
