This mower blade is designed for use on 42-inch cutting decks and supports efficient grass cutting for bagging or side-discharge applications. Its durable construction and balanced design help deliver a clean, even cut while maintaining smooth operation during mowing. Replacing a worn or damaged blade restores cutting performance, improves lawn appearance, and helps ensure reliable, consistent operation of the mower throughout the season.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great parts
The exact parts and even with the delays do to C19 parts came in a reasonable time.
Guest - June 10, 2020
Verified Purchase
★★★★★
★★★★★
great service and always the right part!
this is my third time ordering from here and always the right part !
Guest - May 29, 2020
Verified Purchase
★★★★★
★★★★★
Thanks
Thanks
Pat - July 24, 2020
Verified Purchase
★★★★★
★★★★★
Original blades
I have looked at so many web sites to find my blades couldn’t find them until I ran across yours Great job guys. Will order again from yall
Shane - July 25, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit
Arrived earlier then expected
Ronald - September 1, 2020
Verified Purchase
★★★★★
★★★★★
Fast shipping exactly as described
Great site, blades arrived quickly. Lawn looks great
Guest - May 27, 2021
Verified Purchase
★★★★★
★★★★★
excellent!!!! from ordering to delivery.
Good condition. Good packaging a nd delivered on time.
Guest - June 15, 2021
Verified Purchase
★★★★★
★★★★★
Very Nice!
Parts arrived quickly, Very satisfied.
Guest - December 1, 2021
Verified Purchase
★★★★★
★★★★★
Easy install.
Arrived earlier than expected.
Guest - April 26, 2023
Verified Purchase
★★★★★
★★★★★
Great service !
The service was on point. From ordering, very professional and
courteous, representative
Delivery was prompt and timely
will use your company again,
thank you!!
and timely
Guest - April 29, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Lifted the front end of the mower and put jack stands beneath it. Used an impact wrench to removed the blade nuts. Removed the old blades. Installed the blades on the spindles , then tightened the blade nuts.
Did you find this story helpful?
Thank you for voting!
One spindle broken and replaced both cutting blades
1. Raised the tractor using a hydraulic car jack.
(Remember to leave the tractor in gear and set the parking brake. Use wheel chocks to
prevent forward movement.)
2. I placed 2 cinder blocks under each of the back wheels.
3. Utilizing the 25 inch breaker bar and a piece of 4 X 4 to block
the bl
... Read moreade from moving, I removed the bad blade.
4. I lined up the new blade, then hand tightened the blade on the shaft.
5. The last function, using the tools from 3, I tightened the nut.
6. Raised the tractor off the blocks using a hydraulic car jack.
7. I removed the cinder blocks under the back wheels, lowered
the tractor and removed the wheel chocks.
Took gas tank off mower so could turn up on it rear end. Attached Blade removal tool to side of mower bed. Then used wrench to loosen the blade nuts (mower has two blades). Then loosened the other blade, removed both. Greased the shaft and nut for easy replacement. Put on blades one at a time and tightened them back up. Removed the Blade
... Read moreremoval tool and lowered mover back on to wheels, Replaced the gas tank and reattached gas line. Started mower up and tested blades, then cut the yard. Easy fix.
I started by driving the Cub Cadet LX-42 Riding Mower onto my car ramps and tried to remove the nuts holding the blade. I did not have luck with this so I went on online to look for a Video.
In the video they showed you how to remove the entire deck off the tractor. I did that and brought the deck outside and scraped and hose
... Read mored off all the dried grass from the underside of the deck.
I then used an Impact driver to remove the nuts holding the 2 blades. I installed the 2 blades with the impact driver as well. I then reinstalled the deck which was a lot easier then trying to do this from the bottom.
The 2 plastic wheels were easy just used a wrench to remove and replace.
I then and went out and cut the grass and the mower is working much better now with the new wheels to keep the deck level and with the 2 new blade.
Removed deck, replaced both spindles with socket set. Also replaced with new blades and new drive belt. Takes around 1 hour to do. Pretty straight forward. Put deck back on tractor and fired it up. Then mowed 3 acres of lawn.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16463287
Manufacturer Part Number: 942-04308A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(2010)_WW_6.gif "Part Location Diagram of 942-04308A Husky 2-in-1 Blade")
_(2010)_WW_6.gif "Part Location Diagram of 942-04308A Husky 2-in-1 Blade")
