Part Location Diagram of 545103903 Husqvarna Fuel Tank
See part D-20 in the diagram
( Grid squares measure 1x1 inch )

Fuel Tank 545103903

Manufactured by:
Husqvarna
ERP Number:
ERP16365465
Part Number:
545103903
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(21 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This OEM fuel tank assembly is made out of Plastic and it includes the fuel lines, fuel cap, and fuel filter. It is a common part in gas trimmers that is used to hold the fuel needed for the engine. It is very important to replace the fuel tank if it is cracked or damaged to avoid further damage or serious injuries. Make sure to drain the gas tank before starting a repair. Please note Hardware used to install it is Sold Separately.

Troubleshooting

This part works with the following brands:
  • Poulan
  • Husqvarna
  • Craftsman
This part works with the following products:
  • Leaf Blower / Vacuum
Part# 545103903 replaces these:
530053021, 545103903,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
  • 5 stars
    6
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(21 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Old fuel lines in tank had deteriorated & filter was just laying inside the tank.

Don from Paris, Tennessee

20 of 20 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
545103903
Took the old tank off the leaf blower removing 3 screws, replaced the new tank, which already had the fuel lines & filter inside the tank, fuel lines extending out of the tank were attached back to the carburetor, where old lines were connected. Job finished, for $15 which included shipping.
Did you find this story helpful?
Thank you for voting!

Fuel tank and fuel lines were harden from heat and old age. Fuel lines feel apart and tank cracked while trying to start the blower.

Charles from Maryville, Tennessee

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
545103903
Removed old fuel tank and lines. Installed new fuel tank that came with the fuel lines and pickup weight already installed. Three screws held the tank on, the the fuel lines were exactly the right length to just push on. About five good primes, choke on full and the blower started on the second pull. The ordering process and installati on could not have been any easier. The tank and lines were exactly the same as the originals. I will definitely use this company again and highly recommend them.
Did you find this story helpful?
Thank you for voting!

Filter inside fuel tank broke off hose.

Robert from Colorado Springs, Colorado

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
545103903
Removed the old fuel tank by removing three screws and removing the fuel lines from the carburetor. Mark you fuel lines so can get them back on the correct carburetor nozzle. Install the new tank with the three screw and put the fuel lines on the carburetor .
Did you find this story helpful?
Thank you for voting!

The old gas lines were hard, cracked and broke off at the carburetor.

Jack from Lafayette, Indiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
545103903
The gas tank was fastened with 3 easily accessed hex screws which I removed. I installed the new tank, which fit my Weed Eater FL 1500 perfectly, replaced the screws, plugged in the gas lines, filled the gas tank and it ran like new!
Did you find this story helpful?
Thank you for voting!

Gas lines and fuel filter needed to be replaced . Easier to buy the entire tank that comes with fuel filter and gas lines

Sal from SCOTTSDALE, Arizona

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
545103903, 530052332, 530047932
Removed old tank with 3 screws and installed the new tank
Did you find this story helpful?
Thank you for voting!

Broken fuel lines

Robert from Elberta, Alabama

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
545103903
1 Removed old gas tank
2 Removed broken fuel lines
3 Installed new gas tank
4 Installed new fuel lines
5 Started blower
Did you find this story helpful?
Thank you for voting!

Fuel hoses were brittle and broke apart. Engine rpm were up and down at steady throttle.

Mitchell from Blanchard, Oklahoma

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
530030179, 545103903
1. Replaced the fuel tank which came with new fuel lines.
2. Replaced the spark plug.
Took only a few minutes. Blower runs great.
Did you find this story helpful?
Thank you for voting!

Fuel lines rotten

John from ARLINGTON, Vermont

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
545103903
Remove old and place in new
Did you find this story helpful?
Thank you for voting!

Fuel line rotten and a small leak in the fuel tank.

Jerry from Yuma, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
545103903
Removed the old tank and installed the new tank. Reattached the lines.
Did you find this story helpful?
Thank you for voting!

Contaminated Fuel

Mike from Grand Ronde, Oregon

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
530030179, 545103903
Replaced fuel tank. Brother-in law failed to used Non-Ethanol fuel and subsequent damage to fuel lines and pickup occurred. Crumbled upon removal. Ereplacements and their website made it very easy. Thanks....
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP16365465
Manufacturer Part Number: 545103903
Brand Model Number Description
Craftsman 358797010 Leaf Blower / Vacuum - Blower
Craftsman 358797200 Leaf Blower / Vacuum - Blower
Craftsman 358797201 Leaf Blower / Vacuum - Blower
Craftsman 358797202 Leaf Blower / Vacuum - Blower
Craftsman 358797203 Leaf Blower / Vacuum - Blower
Poulan FL1500 Leaf Blower / Vacuum - Blower
Poulan FL1500LE Leaf Blower / Vacuum - Blower