Shop All Metabo HPT Parts
We sell only genuine Metabo HPT ® parts.
Enter Your Model Number
Shop Metabo HPT Parts & Product Types
All Metabo HPT Replacement Parts
-
Metabo HPT (Hitachi) Band Saw Parts
-
Metabo HPT (Hitachi) Blower Parts
-
Metabo HPT (Hitachi) Chainsaw Parts
-
Metabo HPT (Hitachi) Circular Saw Parts
-
Metabo HPT (Hitachi) Compressor Parts
-
Metabo HPT (Hitachi) Cordless Drill Parts
-
Metabo HPT (Hitachi) Cut-Off Saw Parts
-
Metabo HPT (Hitachi) Demolition Hammer Parts
-
Metabo HPT (Hitachi) Drill Press Parts
-
Metabo HPT (Hitachi) Electric Drill Parts
-
Metabo HPT (Hitachi) Generator Parts
-
Metabo HPT (Hitachi) Grinder Parts
-
Metabo HPT (Hitachi) Hammer Drill Parts
-
Metabo HPT (Hitachi) Impact Driver Parts
-
Metabo HPT (Hitachi) Impact Wrench Parts
-
Metabo HPT (Hitachi) Jig Saw Parts
-
Metabo HPT (Hitachi) Misc Tool Parts
-
Metabo HPT (Hitachi) Miter Saw Parts
-
Metabo HPT (Hitachi) Nailer Parts
-
Metabo HPT (Hitachi) Planer Parts
-
Metabo HPT (Hitachi) Reciprocating Saw Parts
-
Metabo HPT (Hitachi) Rotary Hammer Parts
-
Metabo HPT (Hitachi) Router Parts
-
Metabo HPT (Hitachi) Sander / Polisher Parts
-
Metabo HPT (Hitachi) Screw Driver Parts
-
Metabo HPT (Hitachi) Scroll Saw Parts
-
Metabo HPT (Hitachi) Shear / Nibbler Parts
-
Metabo HPT (Hitachi) Stapler Parts
-
Metabo HPT (Hitachi) Table Saw Parts
-
Metabo HPT (Hitachi) Trimmer Parts
-
Metabo HPT (Hitachi) Vacuum Parts
Same Day Shipping
Toll Free Support
Repair Help & Videos
Commonly Purchased Metabo HPT Parts
Most Popular Metabo HPT Replacement Parts
Metabo HPT Gasket (b)
In Stock
The purpose of the 877325 Gasket is to create a seal between the Exhaust Cover and the Main Body of the nail gun models shown below.
Because of the pressure this Gasket is subject to it will wear and will need to be replaced
Indications are an air leak, sluggish or not sinking the nail, or the driver not retracting.
Part Number: 877325
$5.81
This is a genuine Hitachi replacement part, it is sold individually.The purpose of the 877325 Gasket is to create a seal between the Exhaust Cover and the Main Body of the nail gun models shown below.
Because of the pressure this Gasket is subject to it will wear and will need to be replaced
Indications are an air leak, sluggish or not sinking the nail, or the driver not retracting.
Metabo HPT Piston Bumper (b)
1 Review
In Stock
The purpose of this Piston Bumper is to keep the piston from hitting the bottom of the cylinder and damaging it.
Because this part get so much abuse it has a tendency to crack and fall apart.
If you see and parts of this bumper falling from your nail gun, it is definitely time to replace it.
Part Number: 883511
$20.72
This is a genuine Hitachi replacement part, this item is sold individually.The purpose of this Piston Bumper is to keep the piston from hitting the bottom of the cylinder and damaging it.
Because this part get so much abuse it has a tendency to crack and fall apart.
If you see and parts of this bumper falling from your nail gun, it is definitely time to replace it.
Metabo HPT Guide Lock
5 Reviews
In Stock
Part Number: 886107
$6.18
This is a Genuine OEM Hitachi replacement part which is sold individually. When the guide lock is locked into place, the guide will be set in its current position and no longer adjustable. To adjust, the pin must be pulled. If the part is cracked or damaged otherwise it must be replaced immediately.
Metabo HPT Piston Driver Assembly
1 Review
In Stock
To help extend the life of a pneumatic tool use the specified oil in it daily 4-5 Drops will do every time you use it.
To replace this part you would need a hex key/allen wrench.
• First you want to remove the exhaust cover
• Remove old piston assembly and install new one
• Secure the cover and test the unit
Part Number: 890385
$39.04
This is a genuine OEM approved replacement part designed for use with Hitachi nailers. It is the part of the nail gun that drives the nail into the material that is being used. These assemblies do have a tendency to bend or break if not used correctly or if you are driving nails into extra hard material. Includes a metal piston, driver and the o-ring.To help extend the life of a pneumatic tool use the specified oil in it daily 4-5 Drops will do every time you use it.
To replace this part you would need a hex key/allen wrench.
• First you want to remove the exhaust cover
• Remove old piston assembly and install new one
• Secure the cover and test the unit
Metabo HPT Gasket (a)
3 Reviews
In Stock
Part Number: 877334
$3.99
This is a genuine Hitachi replacement part, it is sold individually. Its purpose is to create a seal and prevent air leaks. Over time this gasket will deteriorate and will have to be replaced. This specific gasket is commonly used in nailers, and is compatible with the models listed below.
Popular Metabo HPT Models
Customer Impressions
I just wanted you to know that because of your fine customer service in mailing me a shipping label and responding promptly to my requests, eReplacementparts will be the ONLY company I order from in the future!
Kevin
Idaho, USA