Easy
Less than 15 minutes
This part is an OEM part from Ryobi. The wire clamp is compatible with the S605D8 1/4 Sheet Sander W/Dust Collector and the S605D 1/4 Sheet Finish Sander. This component is fitted onto the platen, helping to hold the sandpaper. The wire clamp is sold individually. A screwdriver is needed in the replacement.
Wire Clamp S605 662318001
OEM part for: Ryobi, Craftsman
Part Number: 662318001
$4.99
In Stock
Ships within 1 business day 
Compatibility
This Wire Clamp S605 will fit the following 5 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
Craftsman
This item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exact replacement part
I purchase to replace clamps for my craftsman finishing sander. These clamps fit perfectly! Very impressed with the quality, the fit and the speedy delivery. I will definitely be a returning customer.
Guest -
March 7, 2024
Verified Purchase
part fit easily
part fit and easy to install sander works great
iGlobal -
June 3, 2023
Verified Purchase
Exact Part
One of the wire sandpaper clamps to my Ryobi sander broke. Ordered two new wire clamps and they fit exactly.
Guest -
February 22, 2022
Verified Purchase
good service
parts fit perfectly
Guest -
February 21, 2022
Verified Purchase
Ryobi palm sander wire clamp
The previous clamp broke, so I looked for sometime for a replacement. The sander was no longer made because of its age. I found the part here at eReplacement Parts. I highly recommend this website if you cannot find it on amazon, or big chain retail such as Home Depot or Lowes.
Guest -
October 2, 2021
Verified Purchase
Saved the price of a new sander! Thanks
Just like new
Guest -
April 16, 2020
Verified Purchase
Palm Sander Clamp
Item arrived quickly and in perfect condition. Fit my sander perfectly
Guest -
October 7, 2019
Verified Purchase
Arrived on time
My husband was not too happy with the gripping of the part so he worried about bending it in case it snapped. He put a wedge in it and it now works perfectly so he's happy as a perfectionist
iGlobal -
December 21, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Wire Clamp S605
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Wire clamp broke
james - June 11, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed one screw from the broken clamp, and removed it. Installed the new clamp with the same screw. Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original wire clamp had broke.
Paul - March 21, 2024
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed screw.
Removed old clamp.
Positioned new clamp in place.
Installed screw.
Done.
Removed old clamp.
Positioned new clamp in place.
Installed screw.
Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wires to hold down sandpaper were broke.
Robert - March 9, 2024
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Took off screws and clamp, replaced broken wires with new ones and installed screws and clamps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Clamp to hold sandpaper sheet in place was broken
Margaret - December 25, 2021
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed broken clamp, installed new clamp using a screwdriver.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken hold down spring
Stan - February 27, 2021
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Removed old spring.
Installed new one.
Installed new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken hold down spring
Ron - October 9, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed one screw. Removed old spring, replaced with new. Reinstalled screw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
spring clip to hold sandpaper was broken
George - February 14, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
removed broken part and replaced it with the new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Paper clamp busted
Elmer - August 12, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed pivot
Removed old clamp
Installed new clamp
Screwed on pivot
Done
Removed old clamp
Installed new clamp
Screwed on pivot
Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pad worn on corners, spring clip broke
DAVID - November 20, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed old pad and replaced clips
Did you find this story helpful?
Thanks for voting and helping fellow customers!
One of the wire clamps holding the sandpaper to the sander broke.
Richard - September 17, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the Philips head screw holding the broken wire clamp.
2. Removed the broken wire clamp.
3. Installed the new wire clamp.
4. Secured the wire clamp with the Philips screw.
2. Removed the broken wire clamp.
3. Installed the new wire clamp.
4. Secured the wire clamp with the Philips screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
