It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeLonghi coffee makers. The pump is utilized to supply milk to the frother. Over time components may wear out and it may begin to malfunction or to quit working completely, eventually requiring a replacement. Always check the diagrams of your model and the owners manual before beginning the repair. Keep in mind this high-quality plastic body pump is sold as an individual unit. You will need a screwdriver to take the housing apart in order to perform this repair.
Water Pump (ulka 120v 52w) 5113211291
OEM part for: DeLonghi
Part Number: 5113211291
![](/images2/icon-shiptruck.png)
![DeLonghi DeLonghi](images/122345_white.png)
Jump To:
Frequently Purchased Together ?
Compatibility
This Water Pump (ulka 120v 52w) will fit the following 127 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
DeLonghi
Show More Compatible ModelsThis item works with the following types of products:
- Espresso Parts
This part replaces obsolete part #: 5132107000, KW715194, 512759
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
![photo of team member](/images2/portrait-mark.png)
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Water Pump (ulka 120v 52w)
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
No pressure while brewing (Single drops instead of a stream).
Tool Type
Coffee Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Excellent repair, just like brand new. Good Luck.
No water coming from the Espresso machine due to failure of the pump.
Tool Type
Coffee Maker
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Nutdriver
Parts Used
Follow the steps from - https://www.ifixit.com/Guide/De%27Longhi+EC155+Water+Pump+Replacement/52184
With the following differences -
1. Removing the screws requires a special 6-point, star-shaped driver, with a recess to allow for a dimple in the screw heads. A standard driver without the recess will not work.
2. The middle unit, holding the heating unit, must be removed from the main case by unfastening two tabs and applying some pressure to release. This will expose the pump unit.
Delonghi Espresso Machine Stopped Pouring Water
Tool Type
Coffee Maker
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
MAGNIFICA S AUTOMATIC ESPRESSO MACHINE - ECAM 23.210.B
First, I thought it was the Valve (part #5513227961) because water was still coming out of the cappuccino frothier. I ordered the value through this site and replaced the value. That was a difficult repair. Then, it sounded like the pump stopped working. I ordered the pump (part #5113211291), replaced it, and the coffee machine worked like new! What I think happened was that the clogged valve put pressure on the pump since the pump would work but was unable to push any water through the machine. I think the pump burnt itself out as a result of the clogged valve. Anyways, I had difficulty finding any parts for my machine (even Delonghi's official support site didn't have the parts), and am glad eReplacementParts had them in stock! $90 in repairs for a $1,000 espresso machine is waaaaay better than having to purchase a new one or send it out for repair!
Expresso machine would fault no water and get drips into cup
Tool Type
Coffee Maker
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, needle nose pliers
Parts Used
1. Remove 2 screws
2. Disconnect two hoses
3. Put new pump in
4. Install two screws
5. Push hoses back on pump
6. Connect wires and put the plastic back on.
Water pump failed
Tool Type
Coffee Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
2. Removed 2 electrical wires (quick, slide off disconnects)
3. Removed 2 water pipes (no clamps, just slide on/off)
4. Remove water the pump from rubber holders
5. Reinstall with new pump
Bingo!
pump not working; no compression
Tool Type
Coffee Maker
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set
Parts you supplied were identical to originals.
Thanks.
No water was pumping through the machine
Tool Type
Coffee Maker
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
1. Remove back and sides
2. remove wires from pump
3. remove hoses from pump and valve (make sure not to lose the clips or the o-ring inside the valve for the upper hose.
4. rotate pump as needed to remove screws on the top
5. carefully remove upper part of pump from lower and remove pump from lower support
6. using a 12mm wrench, unscrew valve from upper pump shaft
7. remove small o-ring from old valve and insert in same location in new valve
8. place upper pump shaft through upper pump support
9. fasten valve to upper pump shaft using wrench
10. replace upper pump shaft into pump, making sure to keep all pump parts as they were when you removed the shaft, rotating pump as necessary to tighten screws holding pump shaft onto pump body
11. rotate pump into proper position
12. replace pump hoses, ensuring they are properly seated, reinstall clips where required
13. replace wires on pump.
14. start up machine and run one or two rinse cycles until water flows through machine
15, replace sides and back
Enjoy better espresso and milk frothing than you have had in a long time
10 year old Delonghi Magnifica auto espresso maker pump lost pressure
Tool Type
Coffee Maker
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
1. removed the side, front, and back panels
2. Removed the old pump and valve
3. Installed new pump and valve
4. Replaced the filter
5. Tested the unit
6. Replaced the panels.
water pump failed in coffee maker
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, flashlight
Parts Used
Tool Type
Coffee Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
It quit pumping water through the coffee grounds, would only get a couple drops into cup.
Took a chance and ordered new pump.
Removed side and back.
Removed hoses from pump
Hooked hoses up to new pump
Put back and sides back on.
Took me about 15 mins.
Could do it again in about 5
Works like new now! Thanks!!!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.