Easy
30-60 minutes
Genuine OEM replacement part, this item is sold individually.
The Vent Cover is installed on the vent tube on the carburetors for the outdoor products listed below.
After the Vent Hood is installed on the vent line, the the Fuel Tank vent is attached to the Vent Hood.
Vent Cover 13132840630
OEM part for: Echo, Shindaiwa
Part Number: 13132840630
$6.00
In Stock
Order within the next 14 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Vent Cover will fit the following 459 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Blower Parts
Repair Videos ?
Watch the Repair Video for
Vent Cover
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Vent Cover
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Idled ok but no power.
Arden - April 27, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Fingers and thumbs
Parts Used
- Fuel Grommet - 13211546730
- Fuel Filter - A369000480
- Clip - 13201309820
- Vent Tube - V471001201
- Fuel Tank Vent - A356000031
- Purge Bulb - P005003120
- Fuel Line - V471001211
- Tube Connector - 13201103360
- Pipe - 13201212362
- Fuel Return Tube - 13201056330
- Vent Cover - 13132840630
- Fuel Line - V471001191
- Vent Assy. - 13130056431
Removed and replaced all tubes, grommets, filters, etc., and primer bulb. Grommet was leaking for sure, bulb seems to also have had a small leak.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ethanol in fuel dissolved my fuel supply lines over time.
Quinn - September 22, 2017
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
It all started with the purge bulb failure on the bottom of the carburetor. I replaced that first and couldn't draw any fuel into the bulb. I then realized that the rubber fuel line and grommet and pretty much dissolved. I disconnected the two lines connected to the carburetor. loosened the screws holding the handle and removed the fuel tank from the Shred n Vac. I then removed all the fuel lines, filter and vent from the fuel tank and replaced all of the components. I then proceeded to reinstall the tank with the two screws tighten the handle and hook up the fuel lines to the carburetor. I replaced the spark plug and air filter element, purged some fuel to the carb and within two pulls hand it running like a charm. One note I would like to make is that I utilized a dab of grease to hold the two back washers for the fuel tank to the tank to ease re-installation of the fuel tank.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
