This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually, and the tubes are sold separately. Always make sure to drain the tank before beginning the repair.
Check Valve A19712
OEM part for: Porter Cable
Part Number: A19712
Jump To:
Frequently Purchased Together ?
Compatibility
This Check Valve will fit the following 246 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
Show More Compatible ModelsThis item works with the following types of products:
- Compressor Parts
This part replaces obsolete part #: AC-0631
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Check Valve
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Tank not filling with air
Tool Type
Compressor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Adjustable Wrench
2. Removed piston rod from bearing
3. Removed check valve with large adjustable wrench, removed tubing
4. Replaced piston with new ring
5. Replaced check valve
6. Cleaned points on contractor, repaired burned wire connection
7. Let compressor run with tank drain valve open to break in piston ring
Wouldn't compress air
Tool Type
Compressor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Parts Used
Replaced defective check valve which prevented compressor to restart
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, Adjustable Wrench, 3/8 breaker bar
Parts Used
Compressor motor would hum and not turn
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench, Pipe wrench
Parts Used
2. Removed the faulty check valve.
3. Replaced the new valve.
4. Replaced the two lines.
5. Tried it out and celebrated with a glass of ice tea.
Tank would not fill
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, sensor socket (has split on side) and breaker bar
Parts Used
Placed sensor in socket on valve and used breaker bar to remove valve.
Installed new valve with socket and wrench.
Reinstalled inlet nut and valve nut.
Would not hold charge. The unit was allowing compressed air to backup into the compressor
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Adjustable Wrench
Parts Used
2; drained the air from the tank
3;removed air line coming from compressor and regulator
4: removed check valve
5: reversed order to reinstall
6: leaked check all lines and fittings with soapy water
rebuild 30 gallon porter cable brand air compressor
Tool Type
Compressor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, torx socket set
Parts Used
Air Compressor would not start under load.
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, T-10 Screwdriver
Parts Used
2) Removed value and screwed in new value..
3) Reattached piping and tightened flare nuts.
4) Plugged in compressor.
Failed did fix problem.
Would not turn on as pressure decreased
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Torx Screwdriver
Parts Used
2. Removed Tubing attached to check valve.
3. Removed The Old Check Valve.
4. Installed the New, replacement check valve.
5. Attached tubing to the new check valve
6. Installed a New air filter.
7. Re-installed both shrouds.
8. Did a successful trial run.
Check valve in tank malfunction
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, None
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.