Easy
15-30 minutes
This authentic OEM tube, also referred to as a hose, is specially made for espresso machines. It has two bushes on either end and helps to control the flow of water inside the appliance. The hose should be replaced if it is cracked, worn down, or deformed. A faulty hose will result in water leakages, and damage to the internal parts of the equipment. Ensure the machine is switched off before beginning the repair. Remove the back panel of the espresso machine to access the tube. Carefully remove the fasteners holding the tube in place and pull it out of the machine. Place the new tube inside the appliance and reinstall the fasteners. Reattach the back panel to complete the repair.
Tube Ptfe Di2-de4 L=270 2bushe 5513212881
OEM part for: DeLonghi
Part Number: 5513212881
$8.32
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Tube Ptfe Di2-de4 L=270 2bushe will fit the following 64 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
DeLonghi
Show More Compatible ModelsThis item works with the following types of products:
- Espresso Parts
- Coffee Maker Parts
This part replaces obsolete part #: 5532108300, 5532120500
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Part is not what looking for
Part is not looking for, but customer service is very nice to support.
Guest -
March 2, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Tube Ptfe Di2-de4 L=270 2bushe
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
lLeaking tube
David - March 22, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Remove panels of coffee maker, remove leaking tube, replace with new tube, replace panels.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hose leaked, old washer
Marcel - November 6, 2020
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Opened machine
Took retaining clips off the hose
Applied silicone grease on the washer and replaced hose with new washers.
Very easy job.
Took retaining clips off the hose
Applied silicone grease on the washer and replaced hose with new washers.
Very easy job.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking water during expresso making rreplaced 1 tube and several Orings, required silacone lube for rings
ALLEN - January 30, 2018
Tool Type
Coffee Maker
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Take pictures at each stage of disassembly
1 Removed back and L side of coffee maker, Removed coffee press capsule via port behind water reservoir. Lift top off
2 Remove 4 screws holding press capsule together, take pix so levers on bottom can be put in exactly same position. Then remove piston, the remove O-rings, clean grooves thoroughly, grease new rings, and replace them
3 Remove center phillips screw on screen on piston top, clean thoroughly w soap/water and replace
3A. Reassemble piston into press capsule, take care to insert the spring under the top level lever, and refer to your picture to reassemble to press capsule.
4. Examine tube location, remove and replace. DO not disassemble steam generator unless A. there is evidence of leakage or your unit is not producing adequate steam on steam setting.
5. Re-assemble tops side and back.
2 Remove 4 screws holding press capsule together, take pix so levers on bottom can be put in exactly same position. Then remove piston, the remove O-rings, clean grooves thoroughly, grease new rings, and replace them
3 Remove center phillips screw on screen on piston top, clean thoroughly w soap/water and replace
3A. Reassemble piston into press capsule, take care to insert the spring under the top level lever, and refer to your picture to reassemble to press capsule.
4. Examine tube location, remove and replace. DO not disassemble steam generator unless A. there is evidence of leakage or your unit is not producing adequate steam on steam setting.
5. Re-assemble tops side and back.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
