This authentic OEM trigger handle is specially designed for use with pressure washers. It allows the user to control the pressure and flow of water during use. It has an ergonomically designed grip allowing for easy and longer handling. When the pull lever/trigger mechanism is squeezed, it activates the pump, and pressurized water is released through the nozzle. However, if the trigger handle is loose or damaged you will notice water leakage, loss of pressure, weak flow, or no flow at all. A damaged trigger may also cause water to flow continuously leading to wastage and potential safety hazards. Turn off the water supply, and disconnect the washer from power before beginning this repair. Remove the trigger handle from the holder at the end of the pressure washer wand and check the area for any clogs or damage. Place the new handle onto the holder and ensure it is securely fitted before restoring the water supply.
Trigger Handle 308760071
OEM part for: Ryobi
Part Number: 308760071
Jump To:
Frequently Purchased Together ?
Compatibility
This Trigger Handle will fit the following 3 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Ryobi
This item works with the following types of products:
- Pressure Washer Parts
This part replaces obsolete part #: 308760060, 308760053
Customer Part Reviews ?
- 1
- 2
- 3
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Trigger Handle
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The wand broke
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I totally disassembled the broken part.
I found that I could not replace the small part that was broken, but had to buy the entire assembly.
I re-assembled the assembly.
I bought the new assembly,
When it arrived, I screwed the new assembly together.
It worked.
new gun for pressure works fine.
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
put it onto the new gun
works finel
Handle leaked like a siv
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools-hand tighten
Parts Used
The hose basically blew off the trigger handle
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none
Handle was leaking profusely.
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Trigger handle leaking
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools required
Parts Used
Missing hose, wand and soap dispenser
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools needed
I hit a stump.Broke the Mandrel.
Tool Type
Pressure Washer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set
Parts Used
Old trigger handle had a leak.
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Disassembled it
Discovered It had a leak
Ordered a new handle from replacement parts
Installed new handle
Trigger broke
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, None
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.