Easy
15-30 minutes
This is a genuine Weber replacement part. It is a thermometer used in many different models of grills. Its purpose is to determine the temperature inside the grill when cooking. This thermometer reads up to 750 degrees Fahrenheit. It is made out of metal and designed to withstand high temperatures. A screwdriver is needed to remove the wingnut at the neck of the thermometer in order to replace it. Please note this part is sold individually. The bezel it fits into (part 67717) is not included.
Thermometer 60393
OEM part for: Weber
Part Number: 60393
$48.60
In Stock
Ships within 1 business day 
Compatibility
This Thermometer will fit the following 131 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Used grill yesterday with the new parts installed. They made it appear that we had a new grill
Grill great
Guest -
August 21, 2021
Verified Purchase
Weber Thermometer
Part was what was needed. Installed easily. Works great!
Guest -
July 28, 2021
Verified Purchase
Fast, right part, fixed
Got replacement part in a couple of days. Right part. Easy fix.
Hahns -
May 23, 2021
Verified Purchase
Grill parts
The parts were easy to replace on my grill. I like being able to keep my Weber grill in line new condition
Guest -
November 16, 2019
Verified Purchase
Perfect Replacement
This was perfect replacement. Works great.
Be advised that the thermostat comes in two versions, one with a tab (to keep it from turning) and one without a tab. If your lid has a hole for a tab, either model will work. If you lid does not have a hole for the tab, then this is the one you want.
Guest -
July 26, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Thermometer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Thermometer needed to be replaced
Paulo - April 28, 2016
👍 4 of 5 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Just open the grill lid and you can see the thermometer sensor sticking out about 2". At its neck there a wing nut. Remove that and it'll free up the thermometer. Take it out, keep the decorative ring/flange, place it over the new thermometer & reverse the operation. The old thermometer had a positioning lip up above. The new one came without it so just make sure the thermometer is properly positioned (Weber brand name at the bottom). New thermometer installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Thermometer no longer functioning.
DON - November 19, 2021
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
This repair was about as easy as any repair could be. The thermometer rests in a bezel that is located on the grill hood. Because the grill was over 12 years old, I applied some spray lubricant to the wing nut that secures the thermometer inside the bezel housing, which made the task of removing the thermometer much easier. Instillation simply involved placing the new thermometer back into the bezel housing and securing the wingnut from behind. The most time-consuming part involved trying to determine which thermometer to order. There were a couple of thermometers pictured on the website that looked similar to each other, so it goes without saying that doing a little research to determine the exact grill model that you have will help to avoid ordering the wrong part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The dial was broken
Fred - June 4, 2021
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Unscrewed old thermometer and replaced with a new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Incorrect starting point on thermometer
Patrick - June 6, 2021
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Removed wing nut holding old thermometer and installed new one with new wing nut
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Thermometer was bad
Robert - April 3, 2020
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Removed wing nut. Then removed old part. Replaced new part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burners rusted out
Glenn - March 30, 2020
Tool Type
Outdoor Grill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Grinder with cut-off wheels
Parts Used
Removed old burners. Rusted out bolt heads were cut off and drilled out. New stainless self tapping screws were then used to secure the ends of the burners. This would have been a 15 minute repair but for the severly rusted screw heads.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
burners were not burning evenly
david - July 15, 2019
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver
Parts Used
took out old burners and replaced with new. followed the instructions
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old thermometer failed
Peter - August 29, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
1. Unscrewed wing nut from back of old unit.
2. Removed old unit from grill hood
3. Reverse of above to install new thermometer which fit perfectly.
2. Removed old unit from grill hood
3. Reverse of above to install new thermometer which fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The old thermometer quit working on a Summit Platinum 4 burner Weber grill, 12 years old.
Patrick - December 17, 2017
👍 2 of 4 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, WD-40
Parts Used
First, I used WD-40 on the old thermometer to free up the wing nut on the underside of the grill lid. Removal was surprisingly quite easy considering the age and amount of use on my grill.
The main issue was that the replacement kit and the instructions it came with did not include or mention the need for a snap-ring that attaches to the thermometer housing. My grill has a bezel that the thermometer sets in and the snap-ring is necessary to secure the unit to the grill lit. Without this ring the new thermometer could not be tightened down and my have not worked properly.
Fortunately, the snap-ring on the old kit was in good shape (stainless steel) and I was able to use it. The new thermometer works well.
The main issue was that the replacement kit and the instructions it came with did not include or mention the need for a snap-ring that attaches to the thermometer housing. My grill has a bezel that the thermometer sets in and the snap-ring is necessary to secure the unit to the grill lit. Without this ring the new thermometer could not be tightened down and my have not worked properly.
Fortunately, the snap-ring on the old kit was in good shape (stainless steel) and I was able to use it. The new thermometer works well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old thermostat needle became disconnected
Robin - June 17, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Removed existing butterfly nut with pliers and removed broken thermometer. Installed new thermometer, installed new butterfly nut provided and hand tightened.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
