Medium
30-60 minutes
This starter rope is an authentic replacement part approved by the manufacturer. It is commonly used in chainsaws. This rope is attached to the starter pulley. By pulling this rope, the starter pulley is rotated. The machine is able to be started manually this way. The rope should be replaced if it is cut or worn.
Starter Rope 501201502
OEM part for: Husqvarna
Part Number: 501201502
$11.20
In Stock
Ships within 1 business day 
Compatibility
This Starter Rope will fit the following 226 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 226 matching models.
Husqvarna
Show More Compatible Models226 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Husqvarna
- Jonsered
- Poulan
This item works with the following types of products:
- Chain Saw
- Grinder
- Saw
This part replaces obsolete part #: 501201501
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair
Works great
Guest -
August 3, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Starter Rope
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Worn
Daniel - March 21, 2018
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Had to renew guide sleeve in housing before installing new starter rope, used my smallest 1/4" drive socket inverted with a c-clamp to flare new sleeve in place, rest is pretty straight forward
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I had to replace the initiation, c.saw was not firing. While I was replacing the ignition, I replaced the pull rope, air filter and spark plug.
David - December 29, 2016
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Allen Wrench Set, C-Type Vice Grips
Actually this was the second time into this repair. I had purchased an "aftermarket" ignition previously, big mistake. Another lesson learned, ALWAYS USE PROPER REPAIR PARTS. It will save a lot of time and make your repair jobs go much smoother. FYI - The saw is a Husqvarna 372, 24" Bar
I simply removed cover that holds the pull rope and gained access to the ignition area. Tightening down the new ignition while maintaining a gap between the ignition and the "flywheel", using a business card.
I used the vice grips to hold the tightened spring in place while replacing the pull rope, I find it makes it easier to replace the rope, you just have to be careful not to put too much pressure on the vice grips because the reel that holds the rope is plastic, although a very tough plastic, it's still plastic. Put it all back together.
Pulled the rope and was ready to start cutting. Runs like a new saw!
I have had this saw for at least 10 years, it was purchased with a group of saws at a pawn shop. I think I got at least 10 different saws for under $1,000,00. There were two of these saws in the "package". This one saw has been worth the amount paid for all, it is used quite a lot and with the PROPER repair parts will be used a lot more.
Thanks, I'll be back
I simply removed cover that holds the pull rope and gained access to the ignition area. Tightening down the new ignition while maintaining a gap between the ignition and the "flywheel", using a business card.
I used the vice grips to hold the tightened spring in place while replacing the pull rope, I find it makes it easier to replace the rope, you just have to be careful not to put too much pressure on the vice grips because the reel that holds the rope is plastic, although a very tough plastic, it's still plastic. Put it all back together.
Pulled the rope and was ready to start cutting. Runs like a new saw!
I have had this saw for at least 10 years, it was purchased with a group of saws at a pawn shop. I think I got at least 10 different saws for under $1,000,00. There were two of these saws in the "package". This one saw has been worth the amount paid for all, it is used quite a lot and with the PROPER repair parts will be used a lot more.
Thanks, I'll be back
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
