eReplacementParts.com
877-346-4815
Briggs & Stratton Parts

Pulley-starter 295871

OEM part for: Briggs & Stratton Engines

Part Number: 295871


Install
Videos!
Pulley-starter - 295871:Briggs & Stratton Engines 360 View
Pulley-starter - 295871:Briggs & Stratton EnginesPulley-starter - 295871:Briggs & Stratton EnginesPulley-starter - 295871:Briggs & Stratton Engines 360 View
In Stock
Ships within 1 business day
Easy 30-60 minutes (8 rated repairs)?
OEM: Original Equipment Manufacturer ?
Briggs & Stratton Engines Murray Toro

Product Description ?

This starter pulley, also known as a recoil starter pulley, is sourced from the original manufacturer for use in outdoor power equipment. It includes the starter rope and plastic spool to hold the rope. Over time the rope may fray, tear, or the plastic spool may break. A faulty starter pulley will lead to difficulties pulling and retracting the rope, and starting the equipment. To replace the faulty parts, ensure the equipment is off and disconnected from power. Remove the starter housing/cover and remove the old spool and rope. Wind the rope around the new spool and tie a knot to secure it in place. Place the new spool and rope inside the starter mechanism and feed the end of the rope out of the hole in the housing. Reattach the starter cover to complete the repair.

  • Part Type: Starter
  • Classification: Part
  • Weight: 0.32 lbs.
  • Shipping: Ships Worldwide

Compatibility

This Pulley-starter will fit the following 19792 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Displaying 20 of 19792 matching models.

Don't see yours? Try searching our site for :

19792 total model matches. Try the above search to narrow your results.

This is the official OEM part for the following brands:

  • Briggs & Stratton Engines
  • Murray
  • Toro

This item works with the following types of products:

  • Blower
  • Engine
  • Generator
  • Lawn Mower
  • Lawn Tractor
  • Snowblower
  • Vacuum

Customer Part Reviews ?

5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Part is exactly what I was expectiing.
    As always, my parts are easy to find on your drawings and alway arrive on or before the expected time. Very good company to deal with.
    Guest - October 18, 2022 Verified Purchase
    Great service
    Part arrived quickly and a perfect match. Have always had great service.
    Guest - August 30, 2022 Verified Purchase
    Oops!!
    The part was great. It was easy to order but it was the wrong size. I needed a four inch this was a five (didn’t fit) NOT your fault totally mine. I will recommend you to friends as it was so easy and the cost was good!! Thanks for your service. Brian
    Guest - October 27, 2021 Verified Purchase
    everything was fine good as it gets
    all good
    Guest - May 14, 2020 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Pulley-starter


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 30-60 minutes (8 rated repairs)?

    Starter pulley was broken.

    John - March 2, 2016
    👍 10 of 11 people found this instruction helpful
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Wrench Set

    I took the front cover off the Briggs and Stratton engine. I took the rope handle off and then removed the pulley and rope and spring from the cover. I replaced the spring on the new pulley and them wound it up and reattached it to the housing Then I threaded the rope through the hole and replaced the handle.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    starter clutch jamed, breaking the starter pully.

    thomas - December 16, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Generator

    Difficulty

    Easy

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Socket set, Wrench Set, scrach all

    pulled cover, replaced all parts needed. you have to make sure you wind up the starter spring enough so when you let the rope retract it returns all the way in. and if you pull the seal off the starter clutch, old part. watch out for ball bearings to drop. I couldn't believe that parts were still available for my 42 year old pincor generator. I almost junked it, now it's back in service running great. thanks for being there.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Generator pulley stripped

    Jared - September 30, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Generator

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Power Drill, Rivet gun

    Drilled out rivets to remove pulley.
    Removed old starter pulley by bending up wing on pulley housing
    Wound pulley spring back up.
    Carefully placed it back in housing
    Riveted pulley housing back to engine housing.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Plastic Spool which holds the pull starter rope was broken

    paul - June 9, 2017
    👍 2 of 3 people found this instruction helpful
    Tool Type

    Lawn Tractor

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Socket set

    1. Removed pull starter housing from engine
    2. Removed broken spool
    3. Threaded new rope supplied through hole in spool
    4. Knotted the rope and pulled to secure knot in the spool
    5. Rewound the spring with the spool in place
    6. Fed rope end out of housing and threaded rope through pull handle then slide rope through anchor
    7. Knotted rope, pulled through the anchor, slid anchor into pull handle.
    8. Reinstalled pull start housing to engine
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pull start was hanging up and pushing back out of the pulley.

    Philip - April 9, 2018
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Socket set

    1. Removed front pull start housing.
    2. Removed starter rope pulley and spring.
    3. Installed new rope on new pulley.
    4. Attached new spring to new pulley.
    5. Threaded rope through hole and attached pull handle.
    6. Attached pulley to housing.
    7. Anchored loose end of spring to engine.
    8. Bolted pull start housing to engine.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    starter rope pulley broke

    Roland - October 26, 2017
    Tool Type

    Generator

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers, Wrench Set

    replaced pulley and rope as per instructions, put back on engine, worked fine.
    repair very simple. thank you....
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Starter assembly was shot

    keith - September 24, 2017
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Pliers, Socket set, Wrench Set

    Removed the old starter and installed the new one with the hardware that was included
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn parts.

    Everett - September 14, 2017
    Tool Type

    Lawn Mower

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Pliers, Socket set

    1. Removed the housing with the starter pulley.
    2. Installed the new pulley, the rope and the hardware.
    3. Replaced the dip stick seal.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Learn More

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal
    Recent searches:
    Suggested searches:
    Models:
    Manufacturers:
    Need help finding your model number?