Easy
15-30 minutes
This authentic manufacturer sourced replacement starter motor which is specially produced for use with Delta table saws. The starter motor provides an initial motion to engage the flywheel to start the engine. Please note this high-quality item is sold individually.
Starter (5 Horsepower Motor) A26375
OEM part for: Delta
Part Number: A26375
$478.27
In Stock
Ships within 1 business day 
Compatibility
This Starter (5 Horsepower Motor) will fit the following 46 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
This part replaces obsolete part #: 438013170153, 438013170153S
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Starter (5 Horsepower Motor)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Original switch on Delta table saw kept sticking and coming on by itself or not shutting off.
Russell - January 26, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Remove original switch and swap wires one at a time to new replacement switch. Simple operation since the wiring contacts were the same.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not start
Steve - July 17, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Turned off the power.
Removed the plug from the outlet.
Removed the cover from the old switch.
Removed the color coded power lines from the old switch.
Install the power lines on the new switch.
Bolt the new switch to the bracket.
Install the cover plate to the new switch.
Plug in the unit and turn on the power.
Start cutting wood !!
Removed the plug from the outlet.
Removed the cover from the old switch.
Removed the color coded power lines from the old switch.
Install the power lines on the new switch.
Bolt the new switch to the bracket.
Install the cover plate to the new switch.
Plug in the unit and turn on the power.
Start cutting wood !!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original switch burned out
Allen - May 18, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1.Removed original switch, checked wiring layout.
2. Installed new switch.
2. Installed new switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Starter switch for 5HP Unisaw faulty
Dave - December 27, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Removed starter switch, just 2 cover screws and 2 mounting screws
Rewired starter - 240V. Just need to make sure you rewire it the same way, I always take pictures before disassembling.
Re-assembled - pretty straightforward.
Works as expected
Rewired starter - 240V. Just need to make sure you rewire it the same way, I always take pictures before disassembling.
Re-assembled - pretty straightforward.
Works as expected
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Table saw starter would get hot and shut the saw down
Sheila - July 16, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Took off old starter and unwired it. Took off plug end of old one and replaced the plug end of the new one. Electricity that it had to hook up to was not the same end on the new part. Unhooked supply to the saw and hooked it to the new starter. Mounted the starter back on the saw. This was very easy, if you know something about wiring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wouldn't start
Michael - November 23, 2016
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
Remove the switch from the switch bracket
Remove the back cover of the switch
Make a wiring diagram
Disconnect the wires from the old switch and removed them
Connected the new wires to the switch
Replaced the back cover
Attached then new switch to the bracket
Remove the back cover of the switch
Make a wiring diagram
Disconnect the wires from the old switch and removed them
Connected the new wires to the switch
Replaced the back cover
Attached then new switch to the bracket
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
