Easy
15-30 minutes
This is a Genuine OEM Authorized replacement part used on Trimmers/Brushcutters. This item is made out of Metal and it is Sold Individually. This is a Standard Hardware Screw which is generally used to secure the Starter Cover to the unit.
Requires a Hex Key/Allen Wrench to tighten or loosen this Screw.
Starter Cover Screw V202000830
OEM part for: Shindaiwa, Echo
Part Number: V202000830
$4.99
In Stock
Order within the next 13 hours and your part ships today! 
Jump To:
Product Description ?
- 4x16
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Starter Cover Screw will fit the following 1477 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Hedge Trimmer Parts
- Trimmer Parts
- Blower Parts
This part replaces obsolete part #: , 90016204016, 90016304016
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Echo blower carburetor
The parts I ordered were great. My blower works well. erepalcement parts are so reliable. Thank you.
Manny -
July 18, 2022
Verified Purchase
just what the doctor ordered thanks again echo trimmer back again will keep in touch VANCE PRICE
EVERYTHING IS BACK THANKS VERY MUCH VANCE PRICE
Guest -
December 2, 2021
Verified Purchase
arrived quickly fit prfect
everything worked great
Guest -
November 30, 2019
Verified Purchase
Great part works great
Hi great parts factory same
Guest -
May 24, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Starter Cover Screw
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Rope broke and nut was loose on pull start caused it bust it all
Marshall - November 22, 2022
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Changed all the broken parts with new ones on the pull start also replaced the impeller where vacuuming leaves broke some fins
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel system components brittle and broke. Needed carb rebuilt, but complete new carb was cheaper than the kit.
Guy - November 28, 2019
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Torx head tips.
1. Removed the tank.
2. Removed the fuel lines.
3. Removed the carb and associated gaskets.
4. Installed new fuel lines and filter in the tank.
5. Installed the fuel tank.
6. Attached fuel lines to carb.
7. Installed new carb.
8. Installed new spark plug.
9. Added fuel and started blower.
10. Allowed engine to warm and adjusted carb settings, High, low mixture, and idle speed.
2. Removed the fuel lines.
3. Removed the carb and associated gaskets.
4. Installed new fuel lines and filter in the tank.
5. Installed the fuel tank.
6. Attached fuel lines to carb.
7. Installed new carb.
8. Installed new spark plug.
9. Added fuel and started blower.
10. Allowed engine to warm and adjusted carb settings, High, low mixture, and idle speed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sickle blade struck an object and bent the 1/2" X 1" gear shaft
Donald - June 30, 2018
Tool Type
Hedge Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Nutdriver
Completely dismantled trimmer to replace gear box then reassembled using all the parts ordered. I had to be careful reassembling the blades as the two gears had to be installed 180 degrees so blades would oscillate as designed otherwise the gear shaft could be bent again when starting engine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pull cord mechanism broken and prime bulb cracked
Ron - November 23, 2017
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Replace pull cord and prime bulb in 10 minutes. Labor was going to be $80 if I took it somewhere to be repaired
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb was not metering fuel properly, and needed rebuilding.
David - July 16, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
- Starter Cover Screw - V202000830
- Fuel Grommet - 13211546730
- Vent Tube - V471001201
- Fuel Tank Vent - A356000031
- Purge Bulb - P005003120
- Fuel Return Tube - 13201056330
- Screw - 90023805016
- Fuel Line - V471001191
- Guard-top - 15991254130
- Cover-engine - 10151448930
- Shield Kit - P021053450
- Tank-fuel - 13100544332
- Repair Kit - 12530042030
- Lid-air Cleaner - 13030206561
- Air Cleaner Case Assembly - P021002921
- Label-choke - 89012106360
Took off the carburetor and disassembled it completely. Cleaned the bare metal body with carb cleaner and blew it dry with compressed air. Rebuilt it with the gasket and reed kit, reinstalled it and then put on the new fuel tank, fuel filter, air filter, tank grommet and new fuel and vent lines. Installed new engine cover, spark plug, vent for fuel tank and head guard.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts were missing and broken
Howard - September 14, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Hedge Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
1. Remove old coil
2. Replace and re-gap new coil
3. Install new starter assembly
4. Install new screws
5. Re-gap and install spark plug
6. Fill with new fuel
7. Replace fuel tank filter
8. Start unit
2. Replace and re-gap new coil
3. Install new starter assembly
4. Install new screws
5. Re-gap and install spark plug
6. Fill with new fuel
7. Replace fuel tank filter
8. Start unit
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
