Easy
15-30 minutes
This replacement insert is specially designed for Delta table saws. It is a genuine OEM sourced item, not an aftermarket equivalent. These inserts help to reduce splintering on the cuts and prevent thin slices of wood from jamming in between the blade and the plate.
Standard Table Insert 10in 34-154
OEM part for: Delta
Part Number: 34-154
$84.32
In Stock
Order within the next 9 hours and your part ships today! 
Product Description ?
- Part #34-154 is approx. 3-3/4" by 13-3/8" Insert hole is approx. 9-5/8
- Classification: Accessory
- Weight: 1.70 lbs.
- Shipping: Ships Worldwide
Compatibility
This Standard Table Insert 10in will fit the following 136 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Worked perfect
My table saw is back in business! Thank you for the speedy delivery as well
Guest -
December 1, 2023
Verified Purchase
Worked out great thank
Excellent product shipped quick worked great.
Guest -
February 23, 2023
Verified Purchase
Arrived quickly and fit perfectly
Looks lije a factory part.
Guest -
November 16, 2022
Verified Purchase
Back to work
Great replacement for my OME insert that broke during a blade change. So glad I found eReplacementParts.com
Guest -
September 7, 2022
Verified Purchase
New & fit well
Part was a good replacement- it was new & fit well.
Guest -
February 25, 2021
Verified Purchase
Easily replaced throat plate
The part was in perfect condition. The throat plate fit perfectly on our older saw.
Guest -
October 7, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Standard Table Insert 10in
do you have a dado insert for this saw. 36-841
Sam
for model number table saw 36-841
asked on 2023-02-20
Hello Sam, Thank you for your inquiry. Researching the model number that you have provided, we show the compatible part number as 34-154. The availability is listed above the Add to Cart button under the part description. We hope this helps.
eReplacementParts Team February 20, 2023
I am looking for the dado insert for my Delta Unisaw Model 36-957. Available?
Andrew
for model number 36-957
asked on 2022-09-04
Hello Andrew, thank you for your question. Yes, we do sell the Standard Table Insert 10in part 34-154. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team September 04, 2022
I have a custom made Delta 10" table saw from the late 80's early 90's. I'm looking to replace the standard insert table guard. I found one that is the right size but the blade hits the side as I raise the blade height. The number on the back is 422-04-363-0008. Can I still get this replacement part for my table saw?
David
for model number 422-04-363-0008
asked on 2022-02-15
Hello David, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We hope this helps!
eReplacementParts Team February 15, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Table insert was worn after being used for 40+ years.
Thomas - December 2, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
1. Removed the old inset from its cutout in the saw table.
2. Unwrapped the new inset
3. Checked the replacement inset
4. Put replacement inset in the saw table
5. Used an allen wrench to adjust the height of the insert to make it flush with the saw table surface.
A very simple, straightforward repair.
2. Unwrapped the new inset
3. Checked the replacement inset
4. Put replacement inset in the saw table
5. Used an allen wrench to adjust the height of the insert to make it flush with the saw table surface.
A very simple, straightforward repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The table saw had a bad vibration
Kevin - November 10, 2020
Tool Type
Table Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Adjustable Wrench
removed all the old parts and replaced with the list above. Once repair was complete it ran perfect and very quite, the operator did not even know we had it on and testing it. All the vibration disappeared
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Table insert broke because pusher was used improperly
Gary - November 28, 2019
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed pieces of old insert and inserted new on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken insert
Robert - November 2, 2017
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Replaced it with new one adjusted the height with allen wrench so it was level with table saw top and it was done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost the table insert and broke the miter gauge handle
Patrick - December 9, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Place the new insert on the table and adjust the set screws to make it level with the table.
Remove the old handle, then screw in the new one into the miter gauge
Remove the old handle, then screw in the new one into the miter gauge
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
