Medium
30-60 minutes
This is a genuine Ariens component which is supplied by the original equipment manufacturer for use with snowblowers. The purpose of this spring is to apply tension on the connected components. If the hardware is worn or damaged, this will provide an identical replacement for the original component that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct repair procedure. Keep in mind this high-quality item is sold individually.
Sg-tens .056x.60x4.40 08300017
OEM part for: Ariens
Part Number: 08300017
$6.17
In Stock
Ships within 1 business day 
Compatibility
This Sg-tens .056x.60x4.40 will fit the following 652 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 652 matching models.
Ariens
Show More Compatible Models652 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Ariens
This item works with the following types of products:
- Lawn Mower
- Snowblower
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
happy with order
I got my item on time and was very happy to find your email on line thank you nickiorio48@outlook.com
nicholas -
January 7, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Sg-tens .056x.60x4.40
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
idler pully tensioner spring was broken
Tom - February 20, 2021
Tool Type
Snowblower
Difficulty
Hard
Time
More than 2 hours
Tools Used
Socket set, Wrench Set, Adjustable Wrench, vice grips, tin snip
Parts Used
1. disconnected the two cables that control the snow throw chute
2. removed the two bolts that allow separation of the front auger section from the body of the snow blower.
3. Removed the plastic guard that covers the engine pulleys and belts.
4. Installed the new tensioner spring. The first time I hooked it in, it was in a position where the coil part of the spring extension would rub on the main drive pulley. So I repositioned the spring end for end and placed the coil section away from the drive pulley.
5. Reversed the above steps for re-assembly.
NOW FOR THE 20/20 HIND SIGHT PART!! :-)
Before doing all of the above work, I had tried to remove the plastic/rubber cover that houses the belts and pulleys but it wouldn't clear the bottom of the snow throw chute. (If a could have removed it I would have been able to replace the idler spring without taking the snow blower apart I thought about trimming off the corner of the cover but was worried it might create a gap that would allow melting snow to drip on the belts and pulleys. Once I had the front and rear sections of the machine separated I could see that I could snip off enough of the left front bottom corner of the guard without leaving a gap. In other words I could have done that without taking half the snow blower apart!!! Live and learn as they say... I hope all this saves others from all the repair steps above because it's a real pain the hoonyak! And so it goes....
2. removed the two bolts that allow separation of the front auger section from the body of the snow blower.
3. Removed the plastic guard that covers the engine pulleys and belts.
4. Installed the new tensioner spring. The first time I hooked it in, it was in a position where the coil part of the spring extension would rub on the main drive pulley. So I repositioned the spring end for end and placed the coil section away from the drive pulley.
5. Reversed the above steps for re-assembly.
NOW FOR THE 20/20 HIND SIGHT PART!! :-)
Before doing all of the above work, I had tried to remove the plastic/rubber cover that houses the belts and pulleys but it wouldn't clear the bottom of the snow throw chute. (If a could have removed it I would have been able to replace the idler spring without taking the snow blower apart I thought about trimming off the corner of the cover but was worried it might create a gap that would allow melting snow to drip on the belts and pulleys. Once I had the front and rear sections of the machine separated I could see that I could snip off enough of the left front bottom corner of the guard without leaving a gap. In other words I could have done that without taking half the snow blower apart!!! Live and learn as they say... I hope all this saves others from all the repair steps above because it's a real pain the hoonyak! And so it goes....
Did you find this story helpful?
Thanks for voting and helping fellow customers!
broken spring
James - January 28, 2021
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Nutdriver, none
Parts Used
Put the spring on very easy then put the cover back on and was all set to blow snow
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
