eReplacementParts.com
877-346-4815
Murray Parts

Spacer,​ Sleeve 703058

OEM part for: Murray

Part Number: 703058


Install
Videos!
Spacer, Sleeve - 703058:Murray 360 View
Spacer, Sleeve - 703058:MurraySpacer, Sleeve - 703058:MurraySpacer, Sleeve - 703058:MurraySpacer, Sleeve - 703058:Murray 360 View
$7.72
In Stock
Order within the next 12 hours and your part ships today!
Easy 15-30 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Murray

Product Description ?

The shear pin spacer sleeve goes between the auger and the snowblower screw. This part is priced individually. This is an authentic Craftsman replacement part that is sourced from the original manufacturer for use with snowblowers. A wrench may be needed during the replacement of this item. It is made out of metal and will need to be replaced if it breaks.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This item works with the following types of products:

  • Snowblower Parts

This part replaces obsolete part #: 3943MA, MT3943MA, 723913

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for Spacer,​ Sleeve


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 15-30 minutes (3 rated repairs)?

Auger shear pin broker during use

Dale - April 8, 2018
👍 1 of 1 people found this instruction helpful
Tool Type

Snowblower

Difficulty

Easy

Time

Less than 15 minutes

Tools Used

Socket set, Wrench Set

Replace the auger's shear screw, spacer and nut/ Operated snowblower right after and repaired auger worked as expected.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

one shear pin was missing.

John - November 13, 2019
Tool Type

Snowblower

Difficulty

Easy

Time

Less than 15 minutes

Tools Used

Socket set, Adjustable Wrench

Installed the shear pin, spacer and nut on the left shaft of the snowblower. All working now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Snowblower feed auger, worm gear stripped - ate heavy rug under snow!!!!

Marlyn - May 9, 2018
Tool Type

Snowblower

Difficulty

Medium

Time

30-60 minutes

Tools Used

Screwdriver, Socket set, Wrench Set

1. Removed removed spare breaker bolt box from top of blower
2. Remove auger side guides from frame of throat
3. Loosen pulley back of fed assembly - split fed assembly from body of blower
4. Using pulley puller, removed pulley from shaft (drives gear box)
5. Pull auger assembly from throat housing
6. Slide augers off each side of assembly (remove breaker bolts)
7. Separate gear box housing halves - remove brass shavings with grease & all
8. Slide replacement worm gear into position
9. Put new grease into each gear box half, place gasket & tighten halves together
10. Reverse procedure to reassemble

Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal
Recent searches:
Suggested searches:
Models:
Manufacturers:
Need help finding your model number?