Medium
15-30 minutes
It is an OEM component which is specially designed for use with Kohler faucets. This is the spacer assembly for the valve body. It contains the check valve, the spacer, and the seal. Unfortunately, over time parts tend to wear out and they may begin to fail eventually requiring replacements. To ensure the proper repair procedure, refer to the appropriate diagram for your model. You may need a screwdriver and a wrench set to disassemble and reassemble the faucet when replacing this spacer assembly.
Spacer Assembly 1108711
OEM part for: Kohler
Part Number: 1108711
$15.20
In Stock
Order within the next 9 hours and your part ships today! 
Compatibility
This Spacer Assembly will fit the following 3 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 3 of 3 matching models.
Kohler
3 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Kohler
This item works with the following types of products:
- Faucet
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spacer Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Faucet leaks - traced to vacuum valve in spacer assembly not functioning properly
Larry - February 15, 2016
👍 6 of 6 people found this instruction helpful
Tool Type
Faucet
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
Parts Used
I discovered this on my last repair through trial and error. My Kohler coralais K-15160 was leaking. My research indicated the valve was a common failure item and since the leak appeared to come that part I replaced it but with no success. I ensured all seals where seated properly but still no success. On a whim I pulled the spring-loaded vacuum valve (not sure if that is the correct term) out of the spacer assembly and found a piece of sediment lodged there. removed sediment, reassembled everything and it worked fine.
Fast forward a couple months to faucet leaking again. Checked all same elements (including looking for sediment in the vacuum valve). All seemed to be in order but apparently the spring was sticking. I dislodged it and it appears to work fine.
I predict this will re-occur and at some point the the spring will fail. I bought this part to have a spare on the shelf when that happens so the fix can be immediate.
Fast forward a couple months to faucet leaking again. Checked all same elements (including looking for sediment in the vacuum valve). All seemed to be in order but apparently the spring was sticking. I dislodged it and it appears to work fine.
I predict this will re-occur and at some point the the spring will fail. I bought this part to have a spare on the shelf when that happens so the fix can be immediate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Faucet leaking
John - March 22, 2018
Tool Type
Faucet
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Wrench Set
Parts Used
Turn water off at supply valve
Remove handle
Remove cap and nut
Remove internal parts
Replace spacer assembly which contains the defective check valve
Reinstall remaining parts and handle
Turn water on
Lift handle and test for leaks or water flow problems
Remove handle
Remove cap and nut
Remove internal parts
Replace spacer assembly which contains the defective check valve
Reinstall remaining parts and handle
Turn water on
Lift handle and test for leaks or water flow problems
Did you find this story helpful?
Thanks for voting and helping fellow customers!
leaking faucet
Walt - April 8, 2020
👍 0 of 1 people found this instruction helpful
Tool Type
Faucet
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
removed handle
unscrewed valve assembly
ordered new parts (having old parts in hand needed to identify correct parts.)
install new parts.
( O ring not used in this assembly.)
unscrewed valve assembly
ordered new parts (having old parts in hand needed to identify correct parts.)
install new parts.
( O ring not used in this assembly.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
