Easy
15-30 minutes
Solenoid Valve 5213218341
OEM part for: DeLonghi
Part Number: 5213218341
$26.28
In Stock
Order within the next 7 hours and your part ships today! 
Jump To:
Product Description ?
- Plastic Valve
- Classification: Part
- Weight: 0.15 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Solenoid Valve will fit the following 31 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 31 matching models.
DeLonghi
Show More Compatible Models31 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- DeLonghi
This item works with the following types of products:
- Coffee Maker
- Espresso
This part replaces obsolete part #: 5213214731, 5213215801, 5232108700
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Solenoid Valve
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Solenoid Valve was not opening resulting in hot water/steam not coming through the water/steam spigot.
Jamie - April 21, 2016
👍 10 of 10 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
Parts Used
Remove the outer housing of the EAM4500 machine. There are two solenoid valves. One located on the front of the machine and one in the back behind the u-shaped heating element. I tested the machine by removing the hoses, one at a time from the front of the machine to the back to see where the back up was taking place. After determining that the front solenoid was not opening, I removed the hoses, wires, and bracket. Then I installed the new solenoid and tested. You can also test each solenoid with an ohmmeter. (Each should read 400-600 ohms, I believe) Note: This only tests the electronic side of the solenoid and not the mechanical actuation. The valve could still be faulty and test normally with a multimeter.
The new part does not have the same connections as the original part. To adjust I simply stretched the steam hoses to connect directly to the solenoid without and problem. Make sure to reuse or replace the orange/red o-rings that usually stick in the original valve connections.
The new part does not have the same connections as the original part. To adjust I simply stretched the steam hoses to connect directly to the solenoid without and problem. Make sure to reuse or replace the orange/red o-rings that usually stick in the original valve connections.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Water leaking in the back of machine. No water coming out hot water nozzle.
Istvan - October 25, 2017
👍 4 of 4 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed back panel.
Removed and replaced brass solenoid valve with new plastic model.
Removed and replaced brass solenoid valve with new plastic model.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
ESAM5500B milk frother steam would not work
Graham - August 17, 2017
👍 4 of 4 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Remove back panel (screws on back)
2. Remove side panels (screws on side)
3. Remove top panel (need to remove grind adjuster - pop cap cover and there is a recessed screw underneath similar to a bathroom tap)
4. Move the display of the coffee maker out with the front (like you are going to remove the grounds)
5. The solenoid is right in front on top of the coffee maker. Remove screws to take it out and replace with the new solenoid.
6. Based on other reviews I bought a bunch of o-rings and connecting pieces to connect to the solenoid since some reviewer said they were needed. I found the new o-rings and connecting pieces did not fit properly and just used the old connecting pieces that fit perfectly. So in my experience save your self the extra $20 is o-rings and connecting pieces and just buy the solenoid valve itself.
7. Most of my time was cleaning the coffee maker while doing the repairs. The coffee maker is frothing again like new with the new solenoid switch.
2. Remove side panels (screws on side)
3. Remove top panel (need to remove grind adjuster - pop cap cover and there is a recessed screw underneath similar to a bathroom tap)
4. Move the display of the coffee maker out with the front (like you are going to remove the grounds)
5. The solenoid is right in front on top of the coffee maker. Remove screws to take it out and replace with the new solenoid.
6. Based on other reviews I bought a bunch of o-rings and connecting pieces to connect to the solenoid since some reviewer said they were needed. I found the new o-rings and connecting pieces did not fit properly and just used the old connecting pieces that fit perfectly. So in my experience save your self the extra $20 is o-rings and connecting pieces and just buy the solenoid valve itself.
7. Most of my time was cleaning the coffee maker while doing the repairs. The coffee maker is frothing again like new with the new solenoid switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Delonghi Magnifica Espresso Machine boiler and solenoid not working
Brad - December 3, 2016
👍 5 of 6 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Adjustable Wrench
eReplacementparts has a very good video on You-Tube showing exactly what was needed in order to facilitate the repair. I followed the video while doing repair and there were no issues.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Steam was coming out only for a few seconds, then stopped.
Adrian - April 19, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed the covers and replaced the front solenoid valve.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Solenoid valve bad cracked and leaking water.
Todd - February 15, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
When replacing the solenoid valve on this unit it is important to note that the directional plastic connectors need to be replaced as well. They do not connect to the replacement part, so make sure you order all the immediate connecting parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
