Easy
15-30 minutes
It is a genuine OEM sourced part is specially designed for MTD and Ryobi riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality solenoid is sold as an individual component. You will need a screwdriver and a wrench set to perform this repair. Check the diagrams of your model for the exact location and the correct installation of the new part.
Solenoid-12v 925-1426A
OEM part for: MTD, Ryobi
Part Number: 925-1426A
$28.38
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Solenoid-12v will fit the following 23352 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Lawn Tractor Parts
This part replaces obsolete part #: 1740056, 925-1426AB, 725-1426 (Used With Vanguard Engine.), 1751569, 925-01426A, 7251426, 925-1426, 725-1426A, 725-1426, 725-1426P
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
10
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Got what I needed.
Tech-Order Support was great!! I couldn't find the part I needed, but your representative did and had it ordered for me in three minutes. It got here in two days and we were back on our Cub Cadet the day after. Thanks.
Guest -
April 22, 2023
Verified Purchase
Starter Solenoid
Arrived in good shape and worked perfectly.Reasonable priced and a quality product !
Harvey -
February 10, 2023
Verified Purchase
great service, right part - made repair easy
Exactly the part that I needed. Removed the old solenoid and hooked up the new one, mower started up like new again.
Guest -
July 30, 2022
Verified Purchase
Just what I needed
Part was an exact match. P/N identical to the original.
Guest -
July 7, 2022
Verified Purchase
Great service and their website is easy to navigate and find the correct part.
The part arrived in a timely manner and fit perfectly. The diagrams are very helpful in identifying the correct part needed, along with carrying quality parts!
Guest -
September 10, 2020
Verified Purchase
Item worked and fit good as a replacement part.
Item arrived on time and worked perfectly.
Guest -
March 31, 2020
Verified Purchase
little hard location to get at butfit fine up up and in about 30 min
a r up and running
Guest -
November 25, 2019
Verified Purchase
Worked as expected
Arrived quickly. Mower works great again
Guest -
October 10, 2019
Verified Purchase
great parts
working like new
stephen -
June 5, 2019
Verified Purchase
Was exactly what I needed
Worked great and fit perfectly along with key switch tractor starts and runs again THANKS A BUNCH
Guest -
May 27, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Solenoid-12v
Will this part fit my Craftsman Rider DRM500 model #247.27022
Frank
for model number 24727022
asked on 2022-11-09
Hello Frank, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:925-1426A. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team November 09, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Old solenoid not working
ken - August 4, 2016
👍 35 of 49 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Wrench Set, Nutdriver
Parts Used
Removed battery. Took 2 screws off mower body. Took both hot and negative cables off. Pulled 1 spade connector off. Removed and replaced solenoid, installed all connections. Put battery back and started mower up.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Mower did not start, turn the key and nothing happen.
Richard - October 1, 2017
👍 8 of 8 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Took the cables off the battery, took off the panel off in front of the seat, remove the cables from the solenoid, remove the bolts holding the solenoid on. removed the old solenoid, put the new one on put on the cables replaced the panel, and turned the key, and the mower started.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not crank. Replaced battery, no help. Suspected starter solenoid.
Robert - July 17, 2017
👍 3 of 4 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, multimeter to check operation of old solenoid
Parts Used
1. On my tractor, an older Yard Man, the solenoid is accessible by removing battery and battery pan beneath battery, and also removing a plate cover over the F/R shift lever on the floor below the dashboard. I didn't know this at first and put the tractor up on blocks and worked from underneath, which is difficult.
2. Solenoid is attached to the frame by two bolts. (You should note positions of all wires attached to solenoid before removing.) I cleaned and "polished" all wire connections, including ground connections, before installing new one.
3. Replace access pan, battery pan, install and hook up the battery.
2. Solenoid is attached to the frame by two bolts. (You should note positions of all wires attached to solenoid before removing.) I cleaned and "polished" all wire connections, including ground connections, before installing new one.
3. Replace access pan, battery pan, install and hook up the battery.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
fried starter and bad solenoid
Douglas - August 16, 2021
Tool Type
Lawn Tractor
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, torx bit set
Parts Used
solenoid was complicated due to location under the rear body with removal of battery and battery pan...bolts are outside the rear top of the body and you cannot see the nuts inside the body...starter is easy but you need to remove the motor cover and use a torx bit set.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wasn’t getting anything from turning the ignition switch
Donavan - March 23, 2021
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Metal cleaner
Parts Used
I used some battery acid cleaner spayed on bolts in order to get a better ground then I connected solenoid to body then engine turned over
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wouldn’t start
Mark - July 12, 2020
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Took the old one out and put new one in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Solenoid went out on riding lawn mower (lawn tractor)
Candace - July 12, 2018
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, 3/8 open end wrench
Parts Used
1. Removed the old solenoid (2 bolts)
2. Installed new one
Special instructions:
1. Make sure you get the hot and negative wires connected to the correct post
2. Installed new one
Special instructions:
1. Make sure you get the hot and negative wires connected to the correct post
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Starter solenoid not working.
Donald - June 1, 2017
👍 4 of 8 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Replaced the old starter solenoid with the new one. Easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The solenoid wore out.
kris - June 19, 2017
👍 2 of 5 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Take the old solenoid off and put the new one on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not start.
Al - June 11, 2017
👍 1 of 5 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Removed the battery box, removed the bolts and the wires. Reinstalled and tested.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
