Genuine OEM replacement part, this item is sold individually.
The 753-04257 Slider is part of the cutting string release system for the Trimmers listed below.
If your trimmer is not releasing the cutting line properly check this part for wear and all of the other parts associated with it.
Slider:reel Index: 753-04257
OEM part for: Ryobi
Part Number: 753-04257
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Slider:reel Index: will fit the following 210 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Trimmer Parts
This part replaces obsolete part #: 181461, 791-181461
Repair Videos ?
Slider not feeding line? Remove and install the slider on a Ryobi trimmer with simple instructions and illustrations. ...
September 02, 2015
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Slider:reel Index:
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Line was coming out at an extremely fast rate and would tangle around the shaft.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
2. Remove clip and plastic thrust lever.
3. Replace broken metal spool clutch and missing spring, making sure clutch tabs are engaged properly with springs.
4. Reassemble remaining parts in reverse order.
Bent slider, missing spring.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Slider was worn out letting all the string come out.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Had to replace the slider and springs
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, No other tools
A few others have put the video on their repair stories. So look at those and it will help you with this repair.
Broken 'slider', missing springs.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Snap Ring pliers
My Ryobi 135r Elec. Trimmer is approx. 15yrs old. I have had very few problems with it.
Repair was easy as eatin' an entire 'Chocolate Cream Pie', and just as quick.
Bump feed on string head
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Dry lube
Then remove C clip, pull out slider & 2 slider springs below it. Thoroughly clean the body of the trimmer head.
after thoroughly cleaning, spray a little dry lube on the spring & slider grooves inside the head, Install slider springs, install slider (Making sure the spring tabs on slider are over the top of the slider springs), while holding slider & springs in, attach the C clip to shaft that holds the slider in place, but lets it freely slide. Then install plunger spring & plunger. Hold plunger down while attaching the E clip onto the shaft. push plunger & watch slider move to one side, then back when plunger comes back up. Basically, verify operation. If all is good, Install spool & bump knob. Then install trimmer line as normal... Enjoy your newly repaired bump feed head that only takes a slight "bump" to feed more line! :)
String feed
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Snap ring pliers
Very easy.
Slider and.outer spool broke
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Hack saw
Slider claws broke off which caused it not to advance the line out.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Removed spring clips.
Replaced slider.
Broken weed wacker slider
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, snap ring pliers
Parts Used
2. Removed line spool from weed wacker
3. Removed c-clip holding the nylon slide pawl
4. Removed spring from shaft
5. Removed snap ring holding slider in place
6. Removed slider and replaced with new slider
7. Reinstalled snap ring retainer clip
8. Reinstalled spring and nylon pawl
9. Reinstall pawl retaining c clip
10. Reinstalled line spool and bump stop
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.