Medium
1-2 hours
This item has been OEM sourced to ensure quality. The oil seal is intended to be used with small engines from Kohler. The oil seal is used to secure the crankshaft and to prevent oil from leaking between the shaft and the crankcase. This item is priced as an individual part.
Seal-Oil 24 032 19-S
OEM part for: Kohler, MTD
Part Number: 24 032 19-S
$7.77
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Seal-Oil will fit the following 6738 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Lawn Tractor Parts
- Lawn Mower Parts
- Engine Parts
This part replaces obsolete part #: 24-032-01-S, 2403201-S, KH-24-032-19-S, KH-24-032-01, KH-24-032-01-S
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Saved two hundred bucks by doing it myself
Mower dumped all it oil. Narrowed the problem to crankshaft seal. Call repair shop. Three week wait to the tune of "at least $200." Googling brought up ereplacementparts. Ordered the part. Watched a youtube video & voila, perfect! Back now to mowing!
Guest -
September 21, 2023
Verified Purchase
OEM oil seal. Price was really competitive.
I received an OEM replacement oil seal. Was just the right part. Fast shipping and easy to navigate site. Very good buying experience. Definitely will be ordering from this website again.
Anthony -
May 1, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Seal-Oil
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Oil seal worn out, caused oil leak
roger - May 2, 2016
👍 11 of 12 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, oil seal picks
Parts Used
Straight forward procedure. Seal was on PTO end, accessed without need to pull engine. shaft was not tapered so no need for a pulley puller. Sealed nicely - no leaks. Use oil to make new seal slip on evenly; do not seat all the way down, just enough to come flush with surface of crankcase.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Main oil seal leak
John - October 12, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Engine
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Impact wrench
Parts Used
1. Removed engine
2. Separated engine case
3. Removed main seal
4. Reassembled and replaced engine.
5. Taking pictures with my I-Phone was very helpful with remembering how the linkages and Electrical connections were made.
2. Separated engine case
3. Removed main seal
4. Reassembled and replaced engine.
5. Taking pictures with my I-Phone was very helpful with remembering how the linkages and Electrical connections were made.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Crank seal was bad, causing engine to lose oil.
Stephen - September 28, 2020
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Gear puller
Parts Used
Removed engine from mower. Removed front pulley and all engine covers to allow a good pressure washing to remove oil and debris. Removed old seal, and installed new seal. Re-installed motor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
oil seal was bad the replacement seal did not fit
Thomas - September 3, 2019
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Wrench Set
Parts Used
removed clutch put on seal from dealer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cranckshaft oil seal leaking
James - February 17, 2019
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Socket set, Wrench Set
Parts Used
Removed belt drive assembly and hydraulic pump drive pulley then removed old oil seal with a drywall screw. Installed new seal then reinstall drive assembly.
Ordered oil seal and chose expedited shipping because I needed seal quickly. Took a full week to get my seal opened package and was wrong seal. Went to local mower shop and bought correct seal.not worth sending back.
Ordered oil seal and chose expedited shipping because I needed seal quickly. Took a full week to get my seal opened package and was wrong seal. Went to local mower shop and bought correct seal.not worth sending back.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Two broken piston rods
Kevin - January 24, 2019
Tool Type
Lawn Mower
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Torque wrench
1. Remove Heads
2. Removed flywheel
3. Removed oil pan
4. Removed pistons
5. Removed broken rods from pistons
2. Removed flywheel
3. Removed oil pan
4. Removed pistons
5. Removed broken rods from pistons
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rear seal on a Kohler CH23S engine
Daniel - August 29, 2018
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Power Drill, Socket set, Air tools
Parts Used
Removed all the frame work
Remove the clutch
With a battery drill screwed a screw into the old seal
Used a claw hammer to pull the seal
Applied Permatex red to outside of the seal
Hammered the new seal in place with a rubber hammer and a piece of PVC pipe
Used Black Permatex Oil resistant high heat silicone to seal the seal externally
Let cure for 24 hours minimum.
MOW!!
Remove the clutch
With a battery drill screwed a screw into the old seal
Used a claw hammer to pull the seal
Applied Permatex red to outside of the seal
Hammered the new seal in place with a rubber hammer and a piece of PVC pipe
Used Black Permatex Oil resistant high heat silicone to seal the seal externally
Let cure for 24 hours minimum.
MOW!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
