Medium
1-2 hours
Seal 5303283286
OEM part for: Electrolux, Frigidaire
Part Number: 5303283286
$55.01
Factory Backorder
Date Available: Unknown 
Jump To:
Frequently Purchased Together ?
Compatibility
This Seal will fit the following 586 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Frigidaire
Show More Compatible ModelsThis item works with the following types of products:
- Dryer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Seal
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Worn through
James - March 22, 2021
Tool Type
Dryer
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Scrapers
Parts Used
Removed front panel , removed old seals, installed new & replaced panel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dryer was very noisy and clothes often got caught between the drum and frame
PHIL - October 23, 2020
Tool Type
Dryer
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, putty knife/scraper, wire brush on drill
Parts Used
I started with YOU TUBE, where I found my exact make & model.(https://www.youtube.com/watch?v=Kyapga641aE)
I ordered and quickly received the exact parts from E-REPLACEMENT (thank you).
I have some mechanical ability, but was pretty intimated at first. I figured I had nothing to lose so I went at it.
P.S. I also replaced the rear bearing while the dryer was apart.
Now all's well- HAPPY WIFE- HAPPY LIFE
I ordered and quickly received the exact parts from E-REPLACEMENT (thank you).
I have some mechanical ability, but was pretty intimated at first. I figured I had nothing to lose so I went at it.
P.S. I also replaced the rear bearing while the dryer was apart.
Now all's well- HAPPY WIFE- HAPPY LIFE
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dryer would rip holes on clothing
Noe - January 16, 2019
Tool Type
Dryer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set
Watched couple youtube videos after dryer kept ripping holes on clothes.
From there I took apart my dryer to inspect which elements were broken or worn.
Read drum bearing was worn out and broken, upper drum glide was worn, sealbasket lower was replaced to have all new seals. I also ordered a dryer belt since the original was a little cracked.
Looked online for parts to my dryer and ordered them. About a week later I received them and replaced the parts.
Replacing the parts was fairly easy with the help of youtube. I also cleaned the interior and inspected any other components in my dryer. Heater coil had come off one of the ceramic holders. Duct seal was not properly sitting which caused leaking of lint inside dryer.
I let the dryer sit for couple days before any loads were ran through it, to make sure glue had dried properly.
It is now running better than before, and no more hole on clothing.
From there I took apart my dryer to inspect which elements were broken or worn.
Read drum bearing was worn out and broken, upper drum glide was worn, sealbasket lower was replaced to have all new seals. I also ordered a dryer belt since the original was a little cracked.
Looked online for parts to my dryer and ordered them. About a week later I received them and replaced the parts.
Replacing the parts was fairly easy with the help of youtube. I also cleaned the interior and inspected any other components in my dryer. Heater coil had come off one of the ceramic holders. Duct seal was not properly sitting which caused leaking of lint inside dryer.
I let the dryer sit for couple days before any loads were ran through it, to make sure glue had dried properly.
It is now running better than before, and no more hole on clothing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
