Medium
30-60 minutes
The screw attaches to the bulb assembly. This item is an original part from Poulan, Paramount, Weed Eater, and Husqvarna for use in chain saws and trimmers. It is made out of metal and is sold individually. You may need a phillips screwdriver when replacing this item. This part will need to be replaced if it strips or breaks.
Screw 530015780
OEM part for: Poulan, Paramount
Part Number: 530015780
$6.27
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This Screw will fit the following 541 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Trimmer Parts
- Chain Saw Parts
- Saw Parts
This part replaces obsolete part #: 530-016090, 530016090
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Screw
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replaced old fuel line,air filter,rebuilt carburetor, fuel filter.
Larry - July 17, 2016
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
1. Took off the top engine cover and starter rope with cover.
2. I unscrewed the screws holding the old primer bulb to the housing and took the bulb off and removed the old fuel lines.
3. Removed the nuts holding the air filter housing in place and pulled the housing off.
4. I pulled the carburetor out that sets behind the air filter and removed throttle linkage and fuel lines from the carburetor.
5. Removed rotten fuel lines outside and inside fuel tank with fuel filter.
6. I cut the fuel lines at a sharp angle and placed them though the appropriate holes going into the fuel tank. I used a long pair of needle nosed pliers to pull the back line through and out the tank so that I could put the fuel filter on.
7. Last I over hauled the carburetor and from that point put everything back on in reverse order.
2. I unscrewed the screws holding the old primer bulb to the housing and took the bulb off and removed the old fuel lines.
3. Removed the nuts holding the air filter housing in place and pulled the housing off.
4. I pulled the carburetor out that sets behind the air filter and removed throttle linkage and fuel lines from the carburetor.
5. Removed rotten fuel lines outside and inside fuel tank with fuel filter.
6. I cut the fuel lines at a sharp angle and placed them though the appropriate holes going into the fuel tank. I used a long pair of needle nosed pliers to pull the back line through and out the tank so that I could put the fuel filter on.
7. Last I over hauled the carburetor and from that point put everything back on in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
