Easy
15-30 minutes
It is a genuine manufacturer sourced replacement part designed for use with a variety of power tools. It is a standard screw that has multiple uses based on a tool. To ensure compatibility please make sure to check appropriate diagrams for correct location and use of this item. Includes one (1) metal screw per order. Requires a screwdriver for installation/removal.
Screw 330045-08
OEM part for: DeWALT
Part Number: 330045-08
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Screw will fit the following 272 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 272 matching models.
DeWALT
Show More Compatible Models272 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Black and Decker
- DeWALT
This item works with the following types of products:
- Chop Saw
- Drill
- Electric Drill
- Jig saw
- Miter Saw
- Rotary Hammer
- Saw
- Table Saw
This part replaces obsolete part #: 98003-25
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
replacing stripped one
could not be more satisfied!
Guest -
December 5, 2022
Verified Purchase
Worked
1 individual screw, wish there was a pack of all the screws to purchase
Candice -
March 24, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Screw
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Nothing
Reginald - February 18, 2023
Tool Type
Chop Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Took of broken parts
Replaced with new
Replaced with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The miter saw fell off the bench and the handle was broken.
Wade - January 23, 2023
Tool Type
Miter Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Removed the old handle. It helps to take a couple photos of the wire routing after the top piece of the old handle is removed. Remove both pieces and reassemble. Pretty easy job.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
original trigger was broken and hole stripped out
gerald - November 24, 2022
Tool Type
Miter Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, heat gun, torx drivers, tap set, threaded insert
Parts Used
removed old handle, disconnected old switch, reconnected wiring, tapped holes, installed threaded insert, finished installing handle, repaired damage on cord, tested saw; tested good
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The handle crumbled in my hands when carrying
Candice - March 24, 2021
Tool Type
Chop Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1- took picture of wiring diagram with phone
2- removed all old screws and mapped them out to what spots they went to. Make sure you make note of where they come from. There are 7 different screws to do this. Used a #15 star bit.
3- disconnect wires from trigger assembly and remove wire clamp
4- remove bottom piece of handle assembly
5- route all wires from the saw through the base of new handle
6-place power cord at back and reconnect the trigger assembly and route all wires according to the picture or wire diagram
7- screw it all back together using the map you made of where the screws go-note: screw handle to saw first before screwing the handle together
2- removed all old screws and mapped them out to what spots they went to. Make sure you make note of where they come from. There are 7 different screws to do this. Used a #15 star bit.
3- disconnect wires from trigger assembly and remove wire clamp
4- remove bottom piece of handle assembly
5- route all wires from the saw through the base of new handle
6-place power cord at back and reconnect the trigger assembly and route all wires according to the picture or wire diagram
7- screw it all back together using the map you made of where the screws go-note: screw handle to saw first before screwing the handle together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
DeWalt Miter Saw trigger, clamshell, carrying handle broken.
Craig - January 16, 2019
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Star bit/driver
Easy remove and replace of above mentioned parts. All replacement parts fit great. 30 minute job.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken Switch Housing Cover
Bill - November 27, 2018
Tool Type
Chop Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Torx Driver, Phillips Head.
Removed Switch housing cover including undoing wiring harness (Cell phone picture of wiring before disassembly.).
Installed new housing, reattached wires
Installed top housing cover.
Installed new housing, reattached wires
Installed top housing cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
