Easy
15-30 minutes
This is a genuine replacement part that has been sourced from the original manufacturer to be used with chainsaws from Poulan and Husqvarna. The rim is used to link the chain and the clutch drum to rotate the chain around the bar. This item is sold as an individual replacement part.
Saw Rim 640200010
OEM part for: Husqvarna, Poulan
Part Number: 640200010
$8.71
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Saw Rim will fit the following 351 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
This part replaces obsolete part #: 530028650, 501457402
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Saw Rim
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Saw rim gear split in half
Anthony - September 17, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Socket set, Piece of rope to place in spark plug hole to stop rotation
Parts Used
Take out spark plug.
Put piece of rope inside spark plug hole to stop engine rotation.
Remove clutch (reverse rotation)
Remove pieces that need to be replaced.
Replace with new parts (make sure washers and roller bearings in correctly, I lubed my bearings)
Re-assemble.
Test chainsaw.
USE CHAIN BRAKE to make sure clutch is tight.
Put piece of rope inside spark plug hole to stop engine rotation.
Remove clutch (reverse rotation)
Remove pieces that need to be replaced.
Replace with new parts (make sure washers and roller bearings in correctly, I lubed my bearings)
Re-assemble.
Test chainsaw.
USE CHAIN BRAKE to make sure clutch is tight.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
chain saw sproket to run the chain
Harry - September 17, 2019
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
I watched one of your repair videos and did the repairs in 10 min. The part was a direct replacement part and fit perfectly. Had to remove the spark plug and put a piece of rope in to stop the piston a turned nut off and replaced the part. Thanks so much for your help. Back up and running. Part came to my door in two days. Thanks again. You guys are the best.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw rim was wore out and slipped under load.
Archie - January 6, 2019
Tool Type
Chain Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Wrench Set, Finally took an impact type drill to break it loose.
Parts Used
Had to learn that it was a left handed thread. Then to shove a rope down the spark plug gap, then with hammer and wrench I could loosen the nut holding on the rim. The rest was self explainitory.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broke chainsaw drive gear on clutch assembly
Thomas - February 21, 2018
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set, Piece of rope to put in cylinder to stop engine from rotatin
Parts Used
Remove chain and bar
Remove access cover
Removed spark plug
Inserted rope into spark plug hole to keep engine from rotating
Broke clutch assembly nut loose
Removed drive gear
Assembly is reverse
Remove access cover
Removed spark plug
Inserted rope into spark plug hole to keep engine from rotating
Broke clutch assembly nut loose
Removed drive gear
Assembly is reverse
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Warn out drive sprocket after 12 years.
tom - October 25, 2017
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Wrench
Parts Used
Replaced the drive sprocket and the bearing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
