Easy
15-30 minutes
This is an authentic Makita part that has been sourced from the original manufacturer to ensure a high level of quality. The rubber sleeve is intended to be used with circular saws. This rubber sleeve is used to provide spacing and to support the bolt that fastens the depth adjustment assembly to the blade case. This rubber sleeve is sold as an individual replacement part.
Rubber Sleeve 6 262552-1
OEM part for: Makita
Part Number: 262552-1
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Rubber Sleeve 6 will fit the following 27 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 27 matching models.
Makita
Show More Compatible Models27 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Makita
This item works with the following types of products:
- Circular Saw
- Saw
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Rubber Sleeve 6
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bent Depth Gauge and worn out Rubber Sleeve
Steve - January 29, 2023
👍 1 of 1 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Brush to clean out all of the saw
Parts Used
1. Used Allen Wrench to remove set screw on base plate to remove holding bolt on the guide
2. Removed the Rubber Sleeve to move the guard out of position.
3. Removed the securing stop ring.
4. Removed the thumb lock.
5. Removed the nut and washer.
6. Pulled out the bolt and replaced the depth guide.
7. Reverse procedure.
2. Removed the Rubber Sleeve to move the guard out of position.
3. Removed the securing stop ring.
4. Removed the thumb lock.
5. Removed the nut and washer.
6. Pulled out the bolt and replaced the depth guide.
7. Reverse procedure.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Safety cover cracked
Wayne - September 2, 2020
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Ring remover pliers
Removed blade
Removed rubber sleeve via screw
Removed retainer ring
Disconnect spring and remove safety cover
Replace new safety cover and attach spring
Install retainer ring
Replace new rubber sleeve with screw
Reinstall blade
Removed rubber sleeve via screw
Removed retainer ring
Disconnect spring and remove safety cover
Replace new safety cover and attach spring
Install retainer ring
Replace new rubber sleeve with screw
Reinstall blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spring broke
Jose - May 31, 2020
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Just put new in whit long nose pliers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord was cut. Sleeve was worn down.
Chuck - May 11, 2018
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wire cutters
Parts Used
Removed the handle screws for the saw handle cover and unfastened the old power cord. Trimmed the new cord to fit and replaced the handle cover and tightened the screws.
The new cord is of quality material and was a perfect fit. It will last for the life of the saw.
The new cord is of quality material and was a perfect fit. It will last for the life of the saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber Blade Guard Stop had detoriated.
William - May 5, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, A Allen Wrench that came with my Saw
Parts Used
Very simple repair. I used the hex wrench to remove the Saw Blade. Used Screw Driver to remove the screw with the rubber stop. Reinstalled, reinstalled the Saw Blade, and that was the completion of the repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
