Easy
30-60 minutes
This item has been OEM sourced to ensure a high-quality standard. The rotor is intended to be used with trimmers, blowers, and chainsaws from Homelite and Ryobi. The rotor is the engine's flywheel and is used as one of the main components in the ignition sequence. The rotor has magnets on its edge that create an electric charge as they pass the ignition module, this ignites the air/fuel mixture in the cylinder which rotates the crankshaft and the drive shaft. This item includes the pawls that make contact with the recoil starter pulley when the starter rope is pulled.
Rotor W/starter Pawl 300952002
OEM part for: Homelite, Ryobi
Part Number: 300952002
$12.27
In Stock
Order within the next 7 hours and your part ships today! 
Compatibility
This Rotor W/starter Pawl will fit the following 246 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Trimmer Parts
This part replaces obsolete part #: UP05850, 984531-001, UP05850A, 984521-001, 986154001, PA00631, 984531001, 984521001, 300952001, 986153001
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
FFly wheel replacement on a Homelite chain saw.
They shipped me the correct part in a very timely manner, it fit just as it should and the saw is now back in great running condition, it's great getting the right part the first time around and NOT having to deal with returns when getting the incorrect part.
Guest -
February 19, 2020
Verified Purchase
Great Service
Easy repai and leaf blower back up and running good as new
iGlobal -
September 17, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Rotor W/starter Pawl
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Pressed in starter pawl pivot failed, jammed flywheel, broke integral flywheel key.
Warren - July 1, 2016
👍 4 of 6 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Adjustable Wrench, Impact driver w/ long torx bit set
Parts Used
On a Homlite UT-20777 Trimmer remove the rear housing cover, then remove the drive connector and washer. remove the module then the rotor install the new rotor on. Install the module and put a business card between the rotor magnet and the module and tighten the bolts. Replace the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chain saw motor wouldn't turn over when rope was pulled. Only the flywheel would rotate.
Norman - January 13, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, T-20 Torx driver, Blue loctite
Parts Used
!. Removed pull starter side cover.
2. Removed flywheel nut then pulled flywheel off.
3. Inspected flywheel, noticed woodruff key was worn off and no longer catching in slot on crankshaft.
4. Inspected end of crankshaft for any damages, cleaned with wire brush.
5 Installed new flywheel making sure flywheel key was in correct position with crankshaft slot. I used blue loctite on the flywheel nut.
6. Reinstalled side cover and top cover.
7. Filled fuel tank with fuel, pulled rope, motor sputtered on second pull and ran on third pull.
2. Removed flywheel nut then pulled flywheel off.
3. Inspected flywheel, noticed woodruff key was worn off and no longer catching in slot on crankshaft.
4. Inspected end of crankshaft for any damages, cleaned with wire brush.
5 Installed new flywheel making sure flywheel key was in correct position with crankshaft slot. I used blue loctite on the flywheel nut.
6. Reinstalled side cover and top cover.
7. Filled fuel tank with fuel, pulled rope, motor sputtered on second pull and ran on third pull.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Drum worn out and split starter pawl spring broke leaked oil
jay - November 27, 2017
Tool Type
Trimmer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Nutdriver, Tork bits
Remove and replace and watched videos for tips.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
