Easy
15-30 minutes
This genuine item is supplied by the original equipment manufacturer for use with Murray, Simplicity and Snapper lawn mowers. It is the special retaining ring for the wheel. If the hardware is missing or is damaged, this will provide an identical replacement for the original part that was installed on a new unit. One durable metal retaining ring is included. Make sure to check the appropriate diagrams for your model to ensure the correct repair procedure.
Ring, Retainer 1657528SM
OEM part for: Murray
Part Number: 1657528SM
$4.99
Factory Backorder
Date Available: Unknown 
Jump To:
Frequently Purchased Together ?
Compatibility
This Ring, Retainer will fit the following 1349 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 1349 matching models.
Murray
Show More Compatible Models1349 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Craftsman
- Murray
- Simplicity
- Snapper
This item works with the following types of products:
- Lawn Mower
- Lawn Tractor
- Snowblower
This part replaces obsolete part #: 239MA, 1657528
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Good wedsite, parts always work
I am always able to find parts for my older equipment
Guest -
December 15, 2020
Verified Purchase
It was easy to find the right parts thanks to you
Even a wrong part sent was no problem thank you . It wiil be a pleasure to do more business with you.!
Guest -
September 3, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Ring, Retainer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Axle bushings wore down to where the axle had too much play and would kink the chain drive.
Walt - October 26, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Rubber Mallet
1.Remove wheels and bottom plate
2. Utilize a screwdriver to pull worn out bushings out (retainer ring was wore completely away)
3. Put in new bushings on both sides
4. Pounded the retaining ring on both sides using a rubber mallet to push the ring all the way into the slot to hold bushing in place
5. Replaced bottom plate with new screws and lock washers
6. Wiped excess lubricant and the snow blower ran great
2. Utilize a screwdriver to pull worn out bushings out (retainer ring was wore completely away)
3. Put in new bushings on both sides
4. Pounded the retaining ring on both sides using a rubber mallet to push the ring all the way into the slot to hold bushing in place
5. Replaced bottom plate with new screws and lock washers
6. Wiped excess lubricant and the snow blower ran great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Arbor shaft went bad splined washer broke (Alumitnum)
john - October 2, 2022
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Hammer and socket to put on retaining ring
Removed deck removed arbor shaft assembly replaced put back together put it in the deck put belt back on blade drive deck back on deck drive belt on works perfectly!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn out bearings.
Marcel - March 18, 2022
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Remove the bottom cover pan. remove wheels, remove locking washers , remove sprocket wheel bolt, slide out the axle, tap out bearings ( one on each side ). Tap new bearings in and add a small amount of grease then reverse the procedure for installation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
