Easy
15-30 minutes
It is a genuine replacement component which is supplied by the original equipment manufacturer for use with Murray snow throwers. This special retainer outer ring is used to secure the chute assembly to the main unit, please make sure to check appropriate diagrams of your model for correct location and use of this hardware. It is a high-quality component which is made of durable metal and it is sold individually.
Retainer Ring Outer B 585193MA
OEM part for: Murray
Part Number: 585193MA
$30.51
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Retainer Ring Outer B will fit the following 49 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Murray
Show More Compatible ModelsThis item works with the following types of products:
- Snowblower Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Retainer Ring Outer B
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Old snowblower. All three lower chute parts were finally broken repair
Jeffrey - February 7, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Remove the four nuts & bolts from the chute & retainer rings (1/2" socket). Remove the four nuts & bolts from chute collar (7/16" socket). Set the outer chute retainer ring in place and reinstall the chute collar. Set the inner chute retainer ring in place and install the front retainer ring nut & bolt.
The only time I ran into an issue was that when installing the lower chute, I tried starting with the center (rearmost nut & bolt) then installed the right nut & bolt. When it came time to install the left bolt, the hole in the chute didn't seem to reach the bolt. When installing the chute, I recommend installing the two outermost nuts & bolts and finally, the center (rearmost) nut & bolt. Once I switched to this method, I had no problems.
The only time I ran into an issue was that when installing the lower chute, I tried starting with the center (rearmost nut & bolt) then installed the right nut & bolt. When it came time to install the left bolt, the hole in the chute didn't seem to reach the bolt. When installing the chute, I recommend installing the two outermost nuts & bolts and finally, the center (rearmost) nut & bolt. Once I switched to this method, I had no problems.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Inner and outer retaining ring tore (because it is made of plastic) and could not handle the stress.
Dan - November 15, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Simply put, I replaced the damaged parts with new parts using a socket set. I suspect I will have to make the same repairs in a season or two based on the fact that so much plastic is used in the manufacture of modern day products. I did not purchase this product, it was a gift. I will continue to use ereplacement in the future.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The outer retaining had some missing teeth, I ordered any parts in the affected area.
Kevin - October 19, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set, Needle nose
1. Removed the 4 bolts holding the chute housing
2. Removed the worm gear bracket
3. Removed 4 nuts and bolts from the retaining ring holder
4. Removed the tiny cotter pin for the worm gear
5. reassembled all the parts.
Note: The only damage I could see were the broken teeth on the outer ring. I would have been very angry if I didn't order the worm gear bracket. The damage to the worm gear bracket was only found when it was disassembled.
2. Removed the worm gear bracket
3. Removed 4 nuts and bolts from the retaining ring holder
4. Removed the tiny cotter pin for the worm gear
5. reassembled all the parts.
Note: The only damage I could see were the broken teeth on the outer ring. I would have been very angry if I didn't order the worm gear bracket. The damage to the worm gear bracket was only found when it was disassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken plastic retainer ring, blower chute direction hampered.
Fred - February 17, 2017
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
Parts Used
Remove blower chute, 3 bolts, remove metal circle retainer plate which sits above retainer ring,4 bolts, remove old broken ring and replace with new making sure ring teeth fit into the turning block before replacing all bolts. I also replaced the turning block and the screw gear which fits in block which is on the end of the snow direction crank handle. Though it was a good time to replace all the connecting parts as this blower is 20 years old but still does the job,and runs good. Very simple repair. Parts were shipped fast and fit well. Thanks Fred S.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
