Remember to use our DeWalt parts finder to find the right brushes for your miter saw and fix it right the first time.
Replacing the Brushes
1. Remove the cover
Remove the two screws that secure the brush cover. Then remove the cover and set it aside.
2. Remove the brushes
Use your needle-nose pliers to remove the brush leads.
Lift the brush springs out of the way, and remove the brushes from the saw.
3. Install the new brushes
Lift the springs out of the way and slide the new brushes into place.
Connect the wire leads to the saw.
4. Replace the cover
Replace the cover and tighten the screws to finalize the repair.
[Back to Top]
Conclusion
Replacing the brushes on your DeWalt DW718 is a repair you can easily handle yourself. If you always have an extra set of brushes on hand, your work will only get derailed for about 10 minutes--no more waiting on repair shops or parts.
Remember to use our power tool parts finder to find the OEM parts for your DeWalt tools and the other power tools you rely on.
[Back to Top]
What We're About