Medium
30-60 minutes
Primer Hose 951-11699A
OEM part for: MTD, Yard Machines
Part Number: 951-11699A
$6.79
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Primer Hose will fit the following 201 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Yard Machines
Show More Compatible ModelsThis item works with the following types of products:
- Snowblower Parts
This part replaces obsolete part #: 951-11699 (Also Available in Kit Below), 951-11699, 951-12006, 951-12054
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Primer Hose
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Snow blower would not start. Fuel tank had holes, Carb bowl was rusted and full of water.
Benjamin - February 5, 2021
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
1. Remove the key, choke knob, and throttle knob.
2. Remove plastic shroud over carburetor.
3. Disconnect wires to safety key.
4. Remove primer bulb hose and fuel line from carburetor. If there is gas in the tank, clamp the hose to prevent gas from pouring out.
5. Disconnect spring and linkage from carburetor and slide carburetor off the bolts noting the location of the gaskets.
6. Remove start switch for access to the tank bolt.
7. Remove the V belt housing cover between motor and blower hood.
8. Remove the 3 tank bolts.
9. Clean all the gaskets and sealing surfaces for the carburetor and begin assembling the unit.
10. Clean the spark plug and change if needed.
11. Check the oil level and fill or change as needed.
12. Start it and let it run to make sure there are no issues.
2. Remove plastic shroud over carburetor.
3. Disconnect wires to safety key.
4. Remove primer bulb hose and fuel line from carburetor. If there is gas in the tank, clamp the hose to prevent gas from pouring out.
5. Disconnect spring and linkage from carburetor and slide carburetor off the bolts noting the location of the gaskets.
6. Remove start switch for access to the tank bolt.
7. Remove the V belt housing cover between motor and blower hood.
8. Remove the 3 tank bolts.
9. Clean all the gaskets and sealing surfaces for the carburetor and begin assembling the unit.
10. Clean the spark plug and change if needed.
11. Check the oil level and fill or change as needed.
12. Start it and let it run to make sure there are no issues.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
