Easy
Less than 15 minutes
This is an authentic manufacturer approved item which was specially designed for Presto pressure cookers. Its purpose is to hold/support food that is being cooked. This replacement pressure cooker rack is made out of metal and it is sold individually.
Pressure Cooker Cooking Rack 85360
OEM part for: Presto
Part Number: 85360
$8.72
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Pressure Cooker Cooking Rack will fit the following 83 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Presto
Show More Compatible ModelsThis item works with the following types of products:
This part replaces obsolete part #: 2297
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
1
1 stars
1
< PREV
- 1
Quick and easy
Quick delivery, perfect item.
Guest -
January 26, 2021
Verified Purchase
Exactly what we were looking for.
It turns out we really didn't need this because we found the one that was lost, but we'll keep it anyway just in case we lose one the original one.
Guest -
December 31, 2020
Verified Purchase
just what i needed
part is described as stainless steel, but it is definitely aluminum. i figured it would be anyway, so it doesn't matter to me.
Guest -
March 16, 2020
Verified Purchase
flimsy
Part arrived with a few dents in it; it is very flimsy and I'm not sure what will happen to it the first time it is used. It is much more pliable than the original that came with the pressure cooker.
Guest -
September 17, 2019
Verified Purchase
eReplacementParts Team
Hello Nancy,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
It was what I ordered, however...
It was exactly what I ordered, biu it was packed in a plastic bag to mail to me, with nothing on the bag saying "Do Not Bend"... Then it was put in the post office to mail to me. The postal employee "MADE IT FIT" in a too small mailbox, bending it almost in half. BIG NOPE. I just shake my head at the incompetance.
Guest -
August 17, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pressure Cooker Cooking Rack
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Pressure regulator not softly rociking after (?) 20 years of being used 5 times a week.
Fred - February 6, 2016
👍 5 of 6 people found this instruction helpful
Tool Type
Rice Cooker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none!
The inside of old regulator aluminum weight had deteriorated. Throw old weight in trash place new weight on pressure cooker....should have done it 3 to 5 years ago! Pressure cooker now rocks away with that satisfying slow rocking puff like the day I pulled it out of the shipping box.
After 3 years (?) and approximately 1,000 use cycles the old sealing ring gasket was becoming ever more cantankerous to force into 'one more' use. I work with gaskets at the day job and can just touch a gasket and tell how long it has been in service by how hard it becomes with heat and oxidation. Old gasket removed by hand and placed new lively (resilient) sealing gasket in top of pressure cooker and it seals without drama or extravagant tricks. The new gasket seals up before lid is pushed into locking position! Overpressure plug was nice as the old one was very oxidized and hard and becoming reluctant to pressure seal.
The rack! ...The rack was dark, warped and flange was split from forcing a concave depression into a convex dome. Toss old black and brown in trash, drop new shinny rack into place, Twenty years and well past 1,000 use cycles!
After 3 years (?) and approximately 1,000 use cycles the old sealing ring gasket was becoming ever more cantankerous to force into 'one more' use. I work with gaskets at the day job and can just touch a gasket and tell how long it has been in service by how hard it becomes with heat and oxidation. Old gasket removed by hand and placed new lively (resilient) sealing gasket in top of pressure cooker and it seals without drama or extravagant tricks. The new gasket seals up before lid is pushed into locking position! Overpressure plug was nice as the old one was very oxidized and hard and becoming reluctant to pressure seal.
The rack! ...The rack was dark, warped and flange was split from forcing a concave depression into a convex dome. Toss old black and brown in trash, drop new shinny rack into place, Twenty years and well past 1,000 use cycles!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wanted to restore my mother's (deceased) old 6qt. Pressure Cooker
Veronica - March 18, 2016
👍 4 of 5 people found this instruction helpful
Tool Type
Rice Cooker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, None
Now her pressure cooker is as good as new. The body handle had deteriorated, with a Phillips head screw driver, I removed the old one and replaced with a new one. Before replacing the whole body was thoroughly cleaned. The cover was thoroughly cleaned and the new sealing ring was installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing the pressure check valves for my favorite pressure cookers
Elmer - December 2, 2015
👍 3 of 4 people found this instruction helpful
Tool Type
Rice Cooker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, no tools required
Insert Pressure Regulator on top of cooker... your done. I also replaced the Pressure Cooker Cooking Rack
Did you find this story helpful?
Thanks for voting and helping fellow customers!
nothing
Carol - May 26, 2020
👍 1 of 1 people found this instruction helpful
Tool Type
Rice Cooker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, hand
Parts Used
needed a rack to put on the bottom so it would not burn.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Seal was cracked and worn out.
debbie - January 24, 2018
Tool Type
Rice Cooker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Replaced the old with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
