eReplacementParts.com
877-346-4815
Presto Parts
Repair Parts Home
  
Appliance Parts
  
Presto Parts
  85454 Pressure Cooker Body Handle

Pressure Cooker Body Handle 85454

OEM part for: Presto

Part Number: 85454


Install
Videos!
Grid squares measure 1x1 inch
Pressure Cooker Body Handle - 85454:PrestoPressure Cooker Body Handle - 85454:PrestoPressure Cooker Body Handle - 85454:Presto
Factory Backorder
Date Available: Unknown
Easy 15-30 minutes (6 rated repairs)?
OEM: Original Equipment Manufacturer ?
Presto

Product Description ?

It is a genuine OEM supplied replacement part that is specially designed for use with Presto pressure cookers. This is the handle for the body of the pressure cooker, please note the lid handle is sold separately. Please note this item includes one durable plastic handle and one screw that is used to secure it.

  • Classification: Part
  • Weight: 0.15 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This is the official OEM part for the following brands:

  • Presto

This item works with the following types of products:

Customer Part Reviews ?

3
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Part same as original!
    Presto handle looks original and fits perfectly and a new screw was even included! Saved the pan.
    Guest - September 28, 2020 Verified Purchase
    Did not fit.
    The square peg fits in the square hole. What do you do if the squares are different sizes? I could have used the old handle, which was not broke, I just needed the new screw which would have not been the right length if you had supplied it.
    Guest - February 6, 2020 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Pressure Cooker Body Handle


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (6 rated repairs)?

    Broken handle and worn sealing ring

    Jerry - March 31, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Rice Cooker

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the old broken handle
    Screw the new handle on
    Remove the old seal, clean out the channel the ring was in and place the new seal in the channel
    Remove the old air vent and install the new one
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    I have had my pressure cooker for 47 years and the bottom handle was shot...probably from bearing the brunt of the weight of the cooker plus food for so many years.

    Carolyn - March 27, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Rice Cooker

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    I checked the model number and found both the upper and lower handles were still available. I ordered a new sealing ring and automatic air vent, since it had been years since I replaced those. The worst part of the repair was unscrewing the handles. I sprayed on a lubricant and fortunately, my husband was able to unscrew both handles. The replacement parts arrived quickly and doing the repair was a piece of cake. The bottom handle doesn't fit as securely as I would like, but I can't seem to screw the handle on any tighter. It is tight enough that I feel it won't be a problem. I love this pressure cooker and I am thrilled with the results!!!

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broken handles, bad ring and leaking vent pipe

    Floyd - March 20, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Rice Cooker

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Socket set, Adjustable Wrench

    Removal and replacement was easy. Just follow the enclosed instruction. I cleaned up the pressure cooker after the handle, vent pipe and ring(along with safety value) were removed. The pressure cooker should last another 44 years. The booklets that were purchased were to replace lost/missing booklets.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Wanted to restore my mother's (deceased) old 6qt. Pressure Cooker

    Veronica - March 18, 2016
    👍 1 of 1 people found this instruction helpful
    Now her pressure cooker is as good as new. The body handle had deteriorated, with a Phillips head screw driver, I removed the old one and replaced with a new one. Before replacing the whole body was thoroughly cleaned. The cover was thoroughly cleaned and the new sealing ring was installed.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The Pressure Cooker Body Handle was cracking and became potentially dangerous.

    BRUCE - January 20, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Rice Cooker

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    The repair involved two screws, one screw per handle.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    old handle broken at the base and was loose(wobley )

    ORLANDO - November 14, 2015
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Rice Cooker

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Power Drill, none

    HAD TROUBLE REMOVING OLD BOLT--IT WOULD NOT TURN (STUCK TO BASE OF COOKER BODY) I had to drill through the bolt, and with a
    set of pliers I finally removed the bolt. I aligned the new handle (perfect fit)--and is working perfect-- My wife was very happy and thankful

    thanks for your replacement handle------- Orlando
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Learn More

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal
    Recent searches:
    Suggested searches:
    Models:
    Manufacturers:
    Need help finding your model number?