Easy
15-30 minutes
This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
- Length: 8'
- Gauge: 18
- Wires: 3
- Type: Bare Wire
Power Cord (8-foot) 664630-7
OEM part for: Makita
Part Number: 664630-7
$26.32
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- 8', 18 Gauge, 3-Wire
- Classification: Part
- Weight: 0.50 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Power Cord (8-foot) will fit the following 12 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 12 of 12 matching models.
Makita
Show More Compatible Models12 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Makita
This item works with the following types of products:
- Drill
- Grinder
- Polisher
- Sander
Repair Videos ?
Watch the Repair Video for
Power Cord (8-foot)
Articles:
|
This article contains tips and basic steps for replacing power cords for most types of power tools, machines, and other ...
September 18, 2009
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Very nice part
Nice quality replacement part. Very happy with it.
Guest -
August 17, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Power Cord (8-foot)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Cord was broken, brushes and switch worn
RALPH - June 5, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Polisher
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Disassembled polisher by removing screws in case, removed wires at connection locations, reinstalled wires. Removed brush screws in side of case, removed brushes and reinstalled new brushes. Removed wires from old switch, reinstalled wires on new switch, reinstalled case. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Makita Compound Miter Saw, power cable deterioration from age. Replaced.
JERRY - January 17, 2024
Tool Type
Polisher
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Cable cutter. Wire strippers.
Parts Used
Remove strain relief for power cable from rear of saw frame. Remove top of handle where power cable enters housing. Remove cable securing clamp inside housing. Remove main switch, remove wires from switch marking correct placement.
Remove sufficient outer sheathing from new power cable to match old cable. Strip insulation from power cable wires. Attach power wires to switch into correct locations. Install switch and safety lock into place. Install power cable securing clamp inside housing. Attach handle cover. Attach power cable strain relief onto cable and rear of saw frame.
Test unit.
Remove sufficient outer sheathing from new power cable to match old cable. Strip insulation from power cable wires. Attach power wires to switch into correct locations. Install switch and safety lock into place. Install power cable securing clamp inside housing. Attach handle cover. Attach power cable strain relief onto cable and rear of saw frame.
Test unit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
old and needed a few parts refreshed
Travis - January 1, 2021
Tool Type
Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Power Drill, wire strippers
replaced all items above that I check marked
Did you find this story helpful?
Thanks for voting and helping fellow customers!
No longer had electricity going to drill motor
Peter - October 1, 2020
Tool Type
Electric Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, wire connectors, wire strippers
Removed drill handle (containing switch) from drill body
Identified wiring scheme
Cut each wire pair, but left some of the departing plug wire attached to the switch wires to ensure correct rewiring with new plug.
After double checking correct wiring pair, cut off the rest of old cord wire on each pair and stripped the two connecting wires
Crimped connected each new cord wire to the correct drill switch wire
Packed wires carefully into drill handle and installed the 6 screws to reattach switch handle to drill body
Identified wiring scheme
Cut each wire pair, but left some of the departing plug wire attached to the switch wires to ensure correct rewiring with new plug.
After double checking correct wiring pair, cut off the rest of old cord wire on each pair and stripped the two connecting wires
Crimped connected each new cord wire to the correct drill switch wire
Packed wires carefully into drill handle and installed the 6 screws to reattach switch handle to drill body
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cable was fractured needed replaced
Jeff - March 6, 2018
Tool Type
Polisher
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Wire connector & crimper
Parts Used
1. Removed the handle cover.
2. Removed the trigger switch.
3. Removed the trigger switch wires and the old cord cable.
4. Reversed the removal process and installed the new cord cable.
2. Removed the trigger switch.
3. Removed the trigger switch wires and the old cord cable.
4. Reversed the removal process and installed the new cord cable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander was intermittent in operation.
Scott - October 12, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wire stripper
1. Opened up the case.
2. Disconnected the old cord.
3. Removed insulation on the new cord.
4. Installed the new cord.
5. Closed the case.
2. Disconnected the old cord.
3. Removed insulation on the new cord.
4. Installed the new cord.
5. Closed the case.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
