Easy
15-30 minutes
This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
- Length: 10'
- Gauge: 18
- Wires: 2
- Type: Bare Wire
Power Cord (10-foot) 330072-97
OEM part for: DeWALT, Porter Cable
Part Number: 330072-97
$30.53
In Stock
Order within the next 6 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.55 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Power Cord (10-foot) will fit the following 163 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
Show More Compatible ModelsThis item works with the following types of products:
- Plate Joiner Parts
- Saw Parts
- Laminate Trimmer Parts
Repair Videos ?
Articles:
|
This article contains tips and basic steps for replacing power cords for most types of power tools, machines, and other ...
September 18, 2009
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great service
Part was received and was exactly what I needed to repair my dewalt random orbital sander. Excellent service. I am a regular customer.
Rodney -
June 28, 2023
Verified Purchase
great service
great service
Robert -
September 8, 2020
Verified Purchase
Right on the money
Part was identical to the original and went on easy but didn’t come with blade connectors
Guest -
May 19, 2020
Verified Purchase
It took me less than 20 minutes to replace the cord ( i did have the crimp style wire nuts on hand) on
Almost the same cord , restraint was the same. love the length of the replacement cord.
Guest -
May 4, 2020
Verified Purchase
Dewalt belt sander replaced power cord
Power cord exact fit. Your process and eliminate procedure is great. My favorite is your exploded views
Guest -
April 29, 2019
Verified Purchase
Good cord bad information
The picture when you purchase is different than the second picture here I asked specifically are the connectors on the ends of the cord and was told yes, they were not. So after waiting for a week and a half for a 40$ cord that I had. I called again and spoke to a more knowable man and paid $2.50 each and extra shipping - i don’t care so much about the cost it is the time and messing around. It has been a week and a half waiting for two end power clips that they and I paid for for 5 days
Super place to get parts great selection and this is the only time for bad info, but shipping seems to be by pony express most orders come in a day or two and free but a week or two and expensive - ok the products are super so I will keep shopping
Guest -
July 24, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Power Cord (10-foot)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Power cord was frayed and internal wire was cutting out.
Fred - October 10, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the old wire, cut the new leads to length and crimped on the new terminals. Replace the wire inside the sander per the original. Not complicated, just need to do correctly to ensure the top cover fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord wore out at the sander
Anthony - October 25, 2022
Tool Type
Sander
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wire strippers. Dykes. Soldier iron and soldier.
Removed top of orbital sander. Unplugged old cord. Soldiered new blades onto new cord. Plugged in new cord in sander. Replaced the top. Plugged in to test
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord was cut and carbide blades were badly nicked
James - December 5, 2019
Tool Type
Planer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
This used Dewalt planer DW677 was a "gift" from a friend. The cord was easily replaced after removing 1/2 of the cover. The carbide blades were removed using the spanner which is just a small narrow wrench. Turn the retaining nuts clockwise to enable the two blade holders to be slid out of the planer. Pull out the old carbide blades and insert the new. Slide both units into the drum and back off the retaining nuts to tighten in place. Take care to index each carbide cutter on the drum so they are in the same location on the drum. This was the most difficult step but overall a piece of cake.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord, blade guard handle
Roger - April 22, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Solder less connections
R+R power cord, install guard handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Orbital sander needed a new cord.
Daniel - January 29, 2018
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the old cord and replaced with the new cord.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord was worn
Guy - October 1, 2017
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Removed the screws from the switch cover
Removed the screw holding the switch
Removed the old cord from the switch
Cut the cord wires to the correct length and installed the terminals
Installed the cord to the switch
Mounted the switch to the handle
Installed the switch cover
Removed the screw holding the switch
Removed the old cord from the switch
Cut the cord wires to the correct length and installed the terminals
Installed the cord to the switch
Mounted the switch to the handle
Installed the switch cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cord wore out and shorted due to strain reliever being worn out and broken.
Michael - May 19, 2017
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx wrench, wire stripper.
1. Removed the tool case.
2. Cut the wires to remove the crimp connectors.
3. Stripped the ends of the new cord.
4. Threaded on the strain reliever.
5. Crimped/taped connectors.
6. Reassembled.
2. Cut the wires to remove the crimp connectors.
3. Stripped the ends of the new cord.
4. Threaded on the strain reliever.
5. Crimped/taped connectors.
6. Reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace electric cord
paul - August 18, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Took the power tool apart, removed the old power cord, attached the new terminals to the new cord, put back together works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
