Medium
30-60 minutes
This piston ring is an authentic manufacturer approved replacement part. Is is commonly used on Echo gas trimmers/edgers. The purpose of a piston ring is to create an air tight seal inside the cylinder. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase. This would cause low compression and a loss of power. Replacing an o-ring should resolve this issue. This part is made out of metal and is sold individually.
To complete this repair you will need a set of wrenches, pliers and a screwdriver.
• Remove the air cleaner
• Drain the fuel
• Remove the air cleaner case
• Remove the carburetor
• Remove the intake insulator
• Remove the spark plug
• Remove the engine cover
• Remove the insulator gasket
• Remove the starter assembly
• Remove the fuel tank
• Remove the air duct
• Separate the engine
• Bind the engine
• Remove the clutch
• Remove the flywheel
• Remove the starter pulley
• Unbind the engine
• Remove the muffler
• Separate the cylinder from the crankcase
• Remove the piston ring
• Install the piston ring
• Reassemble and test the equipment
Piston Ring A101000000
OEM part for: Echo
Part Number: A101000000
Order within the next 14 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Piston Ring will fit the following 574 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 574 matching models.
574 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Echo
- Little Wonder
This item works with the following types of products:
- Blower
- Cultivator
- Drill
- Edger
- Grass Trimmer
- Hedge Trimmer
- Paint Sprayer
- Pruner
- Reciprocating Saw
- Saw
- Trimmer
This part replaces obsolete part #: 100011-05330, 10001105330
Repair Videos ?
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Piston Ring
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
My trimmer had a piston ring compress and lock. Allowing oil to blow out the exhaust and drying out the rear crank bearing.
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Allen wrenches , emery cloth, 2cycle oil
Parts Used
2. Removed fuel tank,and carburetor to be cleaned.
3. Removed cylinder head from piston and crank shaft housing.
4. Removed engine block from trimmer shaft.
5. Separated crank case and removed locked up rear crank bearing.
6. Replaced bearing and oil seal made a new gasket and seated the crankcase. Covered all parts with 2 cycle oil, just enough to ensure no burnout.
7. Removed piston rings, cleaned the piston and installed new rings.
8. Reinstalled piston into cylinder head making sure the rings were seated at proper alignment, with new head gasket. Making sure cylinder was oiled and not scarred up.
9. Reinstalled carb, gas tank and shaft in reverse order.
10. Fired her up and let run 30mins, torqued bolts. Runs like brand new..!
Piston froze
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
2.Ordered a pair of rings and head gasket, used a brake cyl hone tool wrapped with 1500 grit paper for a light polish job.( BY Hand ). Applied a heavy coat of white grease. The the Rings have and piston has match notches to index the rings .The head slide on the piston very smooth
Lacked power
Tool Type
Cultivator
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver
poor compression
Tool Type
Cultivator
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Parts Used
placed new rings on piston
greased cylinder wall, piston and rings
slipped piston with rings into cylinder
put all bolts and screws back where they belong
have not started yet
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
