This genuine switch assembly is used to turn the fan and the light on or off. It is supplied by original equipment manufacturer as an authentic replacement for Broan range hoods. Includes two mechanical switches with a mounting plate, screws to attach it and the white nameplate. Replacing it is a fairly easy task that should only require a screwdriver. • Make sure the unit is unplugged • Disconnect the wires from the old switch • Remove screws that secure it to the frame • Replace old switch with a new one • Reassemble and test
Troubleshooting
This part works with the following brands:
Broan
This part works with the following products:
Range Hood
Part# S97017729 replaces these:
S97017729,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(14 Reviews)
Click to filter by ratings:
5 stars
14
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy to repair, quick service
Everything was complete and fairly easy to replace.
Tom - July 26, 2019
Verified Purchase
★★★★★
★★★★★
great part
Exact replacement and easy to install
Guest - October 30, 2019
Verified Purchase
★★★★★
★★★★★
Easy fix! Glad to have my stove light fixed!
Thanks for an easy fix !
Guest - November 19, 2019
Verified Purchase
★★★★★
★★★★★
Excellent
Item arrived earlier than expected. Easy to replace. Works great. Thank You
Jennifer - April 6, 2020
Verified Purchase
★★★★★
★★★★★
Easy look up and ordering.
Perfect match.
Guest - April 28, 2020
Verified Purchase
★★★★★
★★★★★
An easy fix!
Part arrived quickly and was easy to replace. Our range hood is perfect again!
Guest - July 21, 2020
Verified Purchase
★★★★★
★★★★★
repair needs a little more info, to make install a bit easier.
parts were correct an install was relative easy
Guest - September 8, 2020
Verified Purchase
★★★★★
★★★★★
Service was great! Part was correct!
The part was the correct model and serial number and worked perfect it arrived early and it was an easy install thanks for your help with this
Guest - September 22, 2020
Verified Purchase
★★★★★
★★★★★
Fast delivery, perfect part.
Brand new part exactly matched the original replaced one, arrived right on time.
Guest - October 4, 2020
Verified Purchase
★★★★★
★★★★★
satisfied
The part was as described, arrived intact and on time.
Guest - October 15, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed hood filters , removed plate under hood to access switch, removed decal on front of hood switch, removed screws, pulled out old switch, unplugged old switch, plugged in new, placed back in hood, installed with new screws, installed new decal. Should have ordered black got white instead looks great.
1. Removed label from switch to exposed two screws.
2. Removed two screws that held switch.
3. Removed switch from appliance.
4. Disconnected cables, taking note of positions of cables.
5. Connected cables to new switch.
6. Pushed new switch into position.
7. Attached switch with two screws.
... Read more/>8. Applied new label to switch.
Read less
Did you find this story helpful?
Thank you for voting!
The plastic piece holding the 2 switches, was broken.
1. Removed the sticker on front of range hood
2. Unscrewed the 3 fasteners
3. Unplugged the old switch
4. Plugged in the new switch, replaced fasteners and installed new sticker. Super easy
Did you find this story helpful?
Thank you for voting!
The light switch clip that holds it in place, broke
I read the reviews that said you only needed a screwdriver & how easy the part was to replace so being a widow ,when my part arrive, I told myself I can do this,I did, the switch for the light & fan work as it should. Very happy that it as made to be replace so easily
Turned off power
Using a pocket knife pried off label on Range vent This revealed three small philips screws.
Removed exhaust fan filters. Removed protective panel behind switches.
Removed front panel screws behind fan/light label.
Noted there is a up/down way to mount new switch.
Duplicated that orientati
... Read moreon for replacement switch assembly. Use screwdriver blade to help remove the push-on connectors. remove and transfer each connector from the old to the new switch assembly.
Remount the new switch assembly. Replace access panel. Replace filters. Energize power.
I unplugged the hood from power. I removed the two screws holding the cover in place. I then removed the decal to access the three screws holding the switch in place and unplugged the wires. I plugged in the new switch and reconnected it with the three new screws provided and reconnected the cover plate. Plugged the hood into an outlet an
... Read mored was finished.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
