OEM Milwaukee Reciprocating Saw Parts & Accessories

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 44-60-1635

This is a genuine OEM sourced replacement part designed for use with Milwaukee sawzall reciprocating saws. This shoe pin secures the shoe retainer. It is made of metal and it is sold individually. To complete this repair you would need a screwdriver and pliers.

Carbon Brush

★★★★★

(16)

$6.16

Manufacturer Part Number:: 22-18-0910

Genuine Milwaukee replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • 2 Required for a set. • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbo...

Brush Holder Assembly

★★★★★

(3)

$6.16

Manufacturer Part Number:: 22-20-0535

This is a genuine Milwaukee replacement part, it is sold individually. 2 are needed for the tools shown below. It includes the Brush and Brush Holder. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electri...

Shoe Assembly

★★★★★

(5)

$8.46

Manufacturer Part Number:: 45-16-0030

This is a pivot shoe assembly for a milwaukee sawzalls sourced directly from original manufacturer. It provides support for your tool while in operation by acting as a spacer/stop. It also helps to reduce vibration and kickback of the sawzall. It is made out of metal and it is sold individually. To replace it you would need a torx screwdriver. • Remove the screws that secure shoe assembly to t...

Barrel Cam

★★★★★

(3)

$6.16

Manufacturer Part Number:: 31-11-0106

It is a genuine item that is supplied by the original equipment manufacturer for Milwaukee sawzalls. The barrel cam is the component in which the follower rides on the surface of a cylinder. Over time it may wear out or get damaged eventually requiring a replacement to make sure your tool operates properly. To ensure the correct installation of the new part, refer to the owners manual and the appr...

Cord Protector

★★★★★

(6)

$6.16

Manufacturer Part Number:: 44-76-0210

This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

Carbon Brush Assembly

★★★★★

(4)

$6.16

Manufacturer Part Number:: 22-20-0065

This is an Authentic Manufacturer Sourced replacement part used on a Makita Sawzall Reciprocating Saws. This Assembly consists of: One (1) Metal Brush Holder With Spring and One (1) Carbon Brush with a Lead Wire Attached. It is recommended to replace both brushes at the same time. To replace this assembly you would need a Screwdriver • First remove Screws holding the cover together. • Carefu...

Shoe Release Lever

★★★★★

(4)

$6.16

Manufacturer Part Number:: 31-52-0090

Genuine Milwaukee replacement part, this item is sold individually. The shoe can be adjusted forward or backward to take advantage of the unused portion of the blade or for special jobs requiring low blade clearance. To adjust the shoe, pull out the shoe release lever 1/4 turn. Slide the shoe forward or backward to the desired position. After adjusting the shoe, slowly pull the trigger to be sur...

Blade Clamp Kit

★★★★★

(40)

$31.14

Manufacturer Part Number:: 14-46-1011

This is an authentic OEM sourced replacement part. It is specially made for use with Milwaukee sawzalls. This is an identical replacement for a missing or a faulty large steel quik-lok blade clamp kit that was included with a new unit. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the exact location and application of this hardware. Keep in mind this...

Shoe Assembly

★★★★★

(7)

$22.35

Manufacturer Part Number:: 45-16-0645

This is a genuine Milwaukee replacement part. It is sold individually for the Milwaukee Sawzalls listed below. The Shoe Assembly helps guide the blade where you want to cut. It is adjustable by pulling down on the 31-52-0090 Shoe Release Lever, for use of longer or shorter blades. The foot pivots for cutting angles. The saw should not be used without this part or it could damage the saw. Part is e...

Lg Quik-loc Blade Clamp Kit

★★★★★

(6)

$30.28

Manufacturer Part Number:: 14-46-1064

This item is a genuine Milwaukee replacement part and it is intended to be used with reciprocating saws. The blade clamp kit is used to secure the saw blades to the spindle assembly. The kit is sold complete and includes all the items that are photographed. The kit is priced as a single item.

Carbon Brush

★★★★★

(19)

$6.16

Manufacturer Part Number:: 22-16-0275

Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operatin...

Milwaukee Reciprocating Saw Parts

Top Milwaukee Reciprocating Saw Models

Popular Milwaukee Reciprocating Saw Parts

Milwaukee Reciprocating Saw Models

Shop by Popular Milwaukee Reciprocating Saw Part Types

Milwaukee Reciprocating Saw Parts

Search By Model or Part Number

Top Milwaukee Reciprocating Saw Models

Popular Milwaukee Reciprocating Saw Parts

Milwaukee Reciprocating Saw Models

Shop by Popular Milwaukee Reciprocating Saw Part Types