Black and Decker Chop Saw Parts
We sell only genuine OEM Black and Decker ® parts.
Top Black and Decker Chop Saw Models
-
Black and Decker 3912 (Type 6) 12 Cut Off Machine Chop Saw Parts
-
Black and Decker 3912 (Type 4) 12 Cut Off Machine Chop Saw Parts
-
Black and Decker 3912 (Type 2) 12 Cut Off Machine Chop Saw Parts
-
Black and Decker 3912 (Type 1) 12 Cut Off Machine Chop Saw Parts
-
Black and Decker 3912 (Type 41) 12 Cut Off Machine Chop Saw Parts
-
Black and Decker 3912 (Type 3) 12 Cut Off Machine Chop Saw Parts
-
Black and Decker 2730 (Type 1) 14 Chop Saw Parts
-
Black and Decker 2730 (Type 3) 14 Chop Saw Parts
Popular Black and Decker Chop Saw Parts
- Manufacturer Part Number:
- 628037-00
This is an original replacement part manufactured for use with drills. This hardened plastic spade handle is secured at the back of the drill using a knob, which is available separately. The spade handle provides an additional grip option for heavy duty drills, please note the spade handle is sold individually.
- Manufacturer Part Number:
- 330079-98
It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
• 2 Prongs
• 2 Wires
• 14 Gauge
• 10 Feet Long
- Manufacturer Part Number:
- 330005-02
This cord guard is a genuine DeWalt replacement part and is sold individually. • Cord guards, also called cord protectors, are designed to slide onto and fit securely at the end of your cord, where its firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard. • This cord guard will fit cords for the tools listed under...
- Manufacturer Part Number:
- 626214-00
This high quality switch is an authentic OEM supplied item, it is not an aftermarket imitation. It is specially designed for Black and Decker and Dewalt chop saws. This switch allows user to turn the tool on and off. Mechanical switches over time tend to wear our and begin to fail eventually requiring replacement. Please note, one plastic switch is included per order. To replace this switch you wi...
- Manufacturer Part Number:
- 383243-00
This rubber foot is an OEM replacement part made for the chop saws listed below. It fits on a corner of the chop saw base, dampening vibrations and stabilizing saw while protecting surfaces beneath. This listing is for one (1) foot. Note that four (4) feet are included with the Base set, part # 391963-00.
- Manufacturer Part Number:
- 330100-98
This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 14 Gauge • 8 Feet Long
- Manufacturer Part Number:
- 144803-00
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
- Manufacturer Part Number:
- 622440-00
This is a genuine OEM approved replacement part designed for use with chop saws. This item holds carbon brush against the armature. It is made out of plastic with metal and it is sold individually. Please note carbon brushes are sold separately. To replace this assembly you would need a screwdriver and pliers. • First remove screws holding the cover together • Carefully remove two halves of ...
- Manufacturer Part Number:
- 622441-00
This is a genuine OEM replacement part used on chop saws. The purpose of the brush cap is to hold the brush in the brush holder. This cap has external threads that thread into the housing of the tool. Be careful when removing and replacing these, they have a tendency to break. This item is made out of plastic and it is sold individually.
- Manufacturer Part Number:
- 860154-00
This is an authentic replacement part that has been sourced from the original manufacturer to be used with radial arm saws from DeWalt and Black and Decker. The bearing is used to reduce friction between a rotating shaft and a fixed part assembly. This bearing is sold as an individual replacement part.
- Manufacturer Part Number:
- 384613-01
This is a genuine Black & Decker/Dewalt replacement part, it is sold individually.2 of these Brushes are required in the tools listed below.It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Car...
- Manufacturer Part Number:
- 146555-01
Genuine Manufacturer Sourced replacement part used on a variety of equipment. This part is made out of Metal and is Sold Individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. B...
Black and Decker Chop Saw Models
-
Black and Decker 3912 (Type 6) 12 Cut Off Machine Chop Saw
-
Black and Decker 3912 (Type 4) 12 Cut Off Machine Chop Saw
-
Black and Decker 3912 (Type 2) 12 Cut Off Machine Chop Saw
-
Black and Decker 3912 (Type 1) 12 Cut Off Machine Chop Saw
-
Black and Decker 3912 (Type 41) 12 Cut Off Machine Chop Saw
-
Black and Decker 3912 (Type 3) 12 Cut Off Machine Chop Saw
-
Black and Decker 2730 (Type 1) 14 Chop Saw
-
Black and Decker 2730 (Type 3) 14 Chop Saw
-
Black and Decker 2730 (Type 4) 14 Chop Saw
-
Black and Decker 3105K (Type 101) Dual Range Cut Saw Chop Saw
-
Black and Decker 3105K (Type 102) Dual Range Cut Saw Chop Saw
-
Black and Decker 3935 (Type 1) 14" Chop Saw
-
Black and Decker 3935 (Type 2) 14" Chop Saw
-
Black and Decker 3934 (Type 4) 14 Chop Saw
-
Black and Decker 3934 (Type 3) 14 Chop Saw
-
Black and Decker 3934 (Type 2) 14 Chop Saw
-
Black and Decker 2731 (Type 1) 14 Chop Saw
-
Black and Decker 23808-BDK (Type 100) Sears Pro Cut Saw Chop Saw
-
Black and Decker CS2001-AR (Type 1) 2000W Chop Saw 14
-
Black and Decker CS2000-B2 (Type 1) Chop Saw